gauge

ive just got an temp gauge that i am trying to fit but im a bit confused with the wiring.:wtf: ive searched but carnt find the answer. the gauge has a yellow,purple,orange and black wires coming from it but which one do i connect to the sender that goes into the block?

Hi guys. I want to fit an oil temperature gauge to my car but dont know where to wire it from. I've heard you can get sump nuts that are adapted to fit. A bit like this: http://www.merlinmotorsport.co.uk/advanced_search_result.php?keywords=sender&sort=3a&&page=3 Although I cant find...

just fitted my boost gauge and wondering where have you run your pipe work to stop it getting so hot? i'v taken my feed from the top of the dv and struggling to keep it away from everything. also the pipe supplied is really weak and collapese around 15 psi, any reccomendation on replacement...

Hello Just ordered my Boost Gauge. got me an Auto gauge smoked face 270 degree jobbie. smoked face and was the closest match the the dash i could find. it comes with a fitting kit but i have seen that i need a No Buzz part from reading on here. where do i get an Inline No Buzz part...

Is there a way to find and read somewhere how can i install a turbo gauge on a TDI fr 170ps engine?I need technical specification and a walkthrough like guide,because from the service they do not know how to.Is there anyone who had done this to his car?I would be very thankful if he send me some...

Hi there, first post, so bare with me. I've got a 2000 X plate Ibiza 1400cc Cool and for some reason the outside temp gauge on the centre console is giving no reading. I know its only a small problem but is annoying. have a look at pictures and see what you think (and no, i don't...

right, i've tried a few searches on the subject and got some info, but im looking for a bit of clarification on it, just for my own piece of mind I have a 2002 mk3 ibiza cupra R, every morning when i start the car from cold (regardless of outside temperature) the coolant level warning light...

Hey, I'm currently (finally) finishing off the installation of my gauges. I have two questions I would appreciate a quick response for [B)] 1. Where's the ignition live feed in the fusebox? 2. How do I safely fit the oil temp sensor into an oil line? Many thanks Dan

just received this off ebay, quite cheap so i wasnt expecting instructions etc. what do i need? obviously vac pipe and t-piece..iv heard you can get cheap tubing from b'n'q? moneys tight at the moment, so its being done on budget (as my holiday is in 3 weeks :lol:) sizes would be...

anybody know if they come with all the tubing and fittings etc? cheers guys

Can anyone help?? Got a 2003 1.9 Tdi 130 and noticed this morning the water temp gauge read 70 degrees even when the ignition was off!! After the 15 mins driver to work it was reading 120 degrees!!! Opened up the bonnet and oil and coolant levels seems ok, the coolant wasn’t boiling over...

just ordered a boost gauge..normal 52mm size.. just thinking of a way to mount it. dont particularly want to get a a pillar, and DEFINATELY dont want to buy a universal one and screw it to the existing. ive spotted that you can get manufactured vents for mk4 golfs, and nev has made one for...

hi can anyone tell me where i can get a mount to put the boost gauge in the right hand heater vent please:think:

Hi All i am after fitting a boot gauge and have read various threads talking about fiting a vacuum hose to the Intercooler pipe but i dont have an intercooler and was wondering if i still can and if so how? cheers for the help in advance

Anyone have a wiring diagram of how to wire ones of these up using the 7 wires on the gauge? cheers guys

HI i just brought a boost gauge the instructions are basicly rubish:( and you have to some drilling is there a simpler way???? thanks

Hi, I have a long standing problem whenever the weather is cold. I would start the engine in the morning and the water gauge indicator in the dashboard would beep and flash red. However, when I turn the car engine off and then turn the car back on the indicator doesn't beep or flash for the...

i'm thinking of getting a boost gauge and have looked at guides for fitting on here, i'm a bit more confident but the wiring seems to confuse me a bit ( not very difficult:confused: ) Pabs guide shows 2 wires connected to the light switch others show 3, are 3 wires for the fancy dancy led...

What should i be seeing on the boost gauge, it seems to spkie at 7PSI and holds a constant 5PSI, this is on a BAM LCR the range is -22vac to 7 psi.

as above, I have used search, not found anything really, its for a mk4 ibiza fr 1,8t, has any one got any pictures?