• Guest would you be interested in CUPRA or SEAT valve caps? let us know in the poll

  • Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.

RDS' Leon Cupra R

tyrer

OEM
Jun 6, 2010
1,991
1
I love how JMS did his, good luck with it mate.

Have you dropped the front another 10mm yet? Are you taking the adjusters out the coilover?
 

Ronin225

Active Member
Jan 17, 2008
4,652
22
Worcester
Good luck with making the grille and i know what you mean about the front plate being a PITA to find somewhere to put it.
I'm just going to honeycombe the centre bit and cut the crash bar so its not visible
What cooler do you currently have??
 

RDS

OEM+
Aug 11, 2010
2,276
11
Newcastle upon Tyne
Good luck with making the grille and i know what you mean about the front plate being a PITA to find somewhere to put it.
I'm just going to honeycombe the centre bit and cut the crash bar so its not visible
What cooler do you currently have??

Cheers mate, think I'm going to need it.

I'm currently running the TX autosport FMIC.


Which cooler you going for mate?

Plate will look cool ;)

Going to give one of these a go, cant go wrong for the price. Would've loved a forge or the new AmD cooler but I've not got the cash and these seem to be performing really well.
 

sambryant

RoadRunner meep meep
Mar 26, 2009
4,848
2
Bristol
Bigger isn't always better ;)

yeah your right, its thing like pressure loss across the core that are also important, mainly caused by smaller inlets, the toyo cooler has no pressure loss and intake temps are amazing. over my apexi (same size as normal forge cooler) i gained 15 ftlb on a 15 degree warmer day with no other mods. also on a power run intake temps stay within 5 degrees of out side temps. impressive stuff on a stage 2 k04 that runs silly hot :D
 
Last edited:

james.l

GT3071r LCR
Mar 18, 2008
2,802
4
My House
www.vagforum.co.uk
Rich,

I had that toyo cooler on my lcr before my big forge, nice bit of kit for the money, spend a little extra time making the piping well and it fit's almost as good as the "kits" offered by tuners.
 

RDS

OEM+
Aug 11, 2010
2,276
11
Newcastle upon Tyne
Bigger isn't always better ;)

Yeah I realise that mate, the TX has been great and thats not big at all, but this cooler has been cropping up more and more recently and is supposedley performing really well and for £85 it would be rude not to give it a go. If it turns out I'm not happy with it I'll not be out of pocket by to much. :D

yeah your right, its thing like pressure loss across the core that are also important, mainly caused by smaller inlets, the toyo cooler has no pressure loss and intake temps are amazing. over my apexi (same size as normal forge cooler) i gained 15 ftlb on a 15 degree warmer day with no other mods. also on a power run intake temps stay within 5 degrees of out side temps. impressive stuff on a stage 2 k04 that runs silly hot :D

:thumbup:

Rich,

I had that toyo cooler on my lcr before my big forge, nice bit of kit for the money, spend a little extra time making the piping well and it fit's almost as good as the "kits" offered by tuners.

I may just keep the pipe work off the TX on there and change the cooler:think: TX pipework seems decent enough:

P1020235.jpg
 

RDS

OEM+
Aug 11, 2010
2,276
11
Newcastle upon Tyne
Due to other commitments I've not done as much work on the new front grill as I would have liked. This is what I've done so far:

Started like this:
P1040753.jpg


Chopped the top bits off one and fibre glassed them in place on the other:
P1040756.jpg


Cut a piece of the lower grill to fit in the gap then filler and glued bits:
P1040760.jpg


Pic of how the honeycomb matches up:
P1040762.jpg


It still is far from finished need to fill in a few parts where the honeycomb is slightly short but overall I'm quite pleased with the progress so far. Hopefully I'll have it finished soon.

Cheers for looking :)
 

Deleted member 12147

Guest
Looking really good mate, well done. Where are you gonna put the numberplate now?
 

bendohhh

Active Member
Nov 11, 2010
172
0
Stockton
Out of interest, when you do this grill mod do you have to cut the original number plate mounting off the bumper or can you remove it somehow?

Love your progress Richard.
 

Deleted member 12147

Guest
No you have to cut the bumper mount unfortunately.
 
Last edited by a moderator:

RDS

OEM+
Aug 11, 2010
2,276
11
Newcastle upon Tyne
Out of interest, when you do this grill mod do you have to cut the original number plate mounting off the bumper or can you remove it somehow?

Love your progress Richard.

Cheers mate

Like JMS said, the bumper needs cut

No you have to cut the bumper mount unfortunately.

Out of interest mate does it leave a small gap or will it be covered by the curve of the grill?
 

RDS

OEM+
Aug 11, 2010
2,276
11
Newcastle upon Tyne
New intercooler has arrived today:

P1040766.jpg


to give you an idea of the size of it, here it is with the new grill:

P1040765.jpg


Compared to:

P1020284.jpg


P1020536.jpg


Only problem is the one I ordered has 64mm inlet and outlet and the one they have sent has 76mm inlet and outlet, so I need to ring them tomorrow to see about getting one sent out with the correct size inlet and outlet :( nothing's easy.
 
Genuine SEAT Parts and Accessories.