Hello!
New to the forum, sorry it is asking for help straight away!
We've had our 2014 Seat Leon ST with a 1.2 TSI CYVB motor since early 2018, no issues at all. Yealy oil changes, with the most recent one done on Friday. Today we went on a long ish drive and on the way back i noticed the EPC light had come on, along with a stop/start error on the car panel. We pulled over and turned off engine, it struggled to start again and was quite rough when at low speeds - sounded like it wasn't running on all cylinders (i wondered if spark plugs needed doing, service manual says 4 years so had already looked into getting the puller to replace them ), though I guess it could be explained by what I found online....
We got home and I connected up a code reader. I don't think i've connected it to this car before, if I have, it didnt have these "messages" before. There was p0016, p2293, a random misfire error, and then one per cylinder for misfiring. I cleared the codes and ran to the end of the road and back, the EPC light came back on and the P0016 and P2293 codes were back.
I've not found anything here for these two codes, though I have spotted for some russian forum suggesting they replaced 04E906455AC which is the cam position sensor - makes sense....I thought i'd check here though incase anyone had any experience of these error codes happening together and the symptoms.
Thanks in advance
Gareth
New to the forum, sorry it is asking for help straight away!
We've had our 2014 Seat Leon ST with a 1.2 TSI CYVB motor since early 2018, no issues at all. Yealy oil changes, with the most recent one done on Friday. Today we went on a long ish drive and on the way back i noticed the EPC light had come on, along with a stop/start error on the car panel. We pulled over and turned off engine, it struggled to start again and was quite rough when at low speeds - sounded like it wasn't running on all cylinders (i wondered if spark plugs needed doing, service manual says 4 years so had already looked into getting the puller to replace them ), though I guess it could be explained by what I found online....
We got home and I connected up a code reader. I don't think i've connected it to this car before, if I have, it didnt have these "messages" before. There was p0016, p2293, a random misfire error, and then one per cylinder for misfiring. I cleared the codes and ran to the end of the road and back, the EPC light came back on and the P0016 and P2293 codes were back.
I've not found anything here for these two codes, though I have spotted for some russian forum suggesting they replaced 04E906455AC which is the cam position sensor - makes sense....I thought i'd check here though incase anyone had any experience of these error codes happening together and the symptoms.
Thanks in advance
Gareth