-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
Stijn's CUPRA Formentor modification journey
- Thread starter Stijn
- Start date
Looking forward to seeing what else you have lined up! Where abouts did you get the paddle extenders? Are they solid or do they twist when pulled from the top?
Thanks 
Picking up the car tomorrow, exited to see the result!
The padles are found everywhere online, even on Aliexpress. Bought mine from an official VAG store, fits every recent model across the brands. And yeah they replace the rubber from the brake, the whole plastic footrest, and over the platic throttle. Last one is a bit of struggle tho
Picking up the car tomorrow, exited to see the result!
The padles are found everywhere online, even on Aliexpress. Bought mine from an official VAG store, fits every recent model across the brands. And yeah they replace the rubber from the brake, the whole plastic footrest, and over the platic throttle. Last one is a bit of struggle tho
Yeah probably more noticeable in our colder climate.
From cold the 1.5 TSI can be hesitant / stutter until it is warmed up, it is more pronounced in colder weather.
i was just wondering if a full fat remap helped the cold start out as should be injecting more fuel, as most suspect the stutter to be fuel starvation for emissions reasons.
apparently not all 1.5 TSI’s are affected. Or maybe they are and some owners don’t notice.
Last edited:
To be honest, mine is always sleeping in the garage. And it takes me about 10 seconds from start to drive, I never let it sit in idle.
But I'll have a closer listen next time
I do know our 1.5 TSI engine is not the exact same as on other/older brands and models.
I'll ask my tuner next time I'm there, might be a standard upgrade they to.
We had a 1.5 Ateca which we rejected due to the blooming thing cutting out at the most inappropriate times, it was downright dangerous.
Supposed to be something to do with the cold weather and there was a fix for it at some point, don’t know if that ever happened or not. I know I wound t touch another one, no issues whatsoever with the 2.0. Been sound as a pound.
Sent from my iPhone using Tapatalk
Time to post about the recent work the car got!
Also fitted my BlackVue 650S-2CH
Tomorrow I'm heading to the dealer to replace the whole touchscreen, and a new update. Hope this will fix all bugs
Next big post?... New wheels! Should be coming in this week
- Rear windows (5) tinted in 5% film
- Front side windows (2) tinted in 50% film
- Sunbanner in 5% film
- STEK PPF DynoShade on front and fog lights
- LUXE Lightwrap on back and reflector lights
- STEK PPF DynoShield on front bumper - doorseals - doorhandles - b/c pillars - gas lid - gear knob
- STEK PPF DynoBlack Carbon Matte on side rear mirror caps
Also fitted my BlackVue 650S-2CH
Tomorrow I'm heading to the dealer to replace the whole touchscreen, and a new update. Hope this will fix all bugs
Next big post?... New wheels! Should be coming in this week
No, 20 
could have maybe gone for 21 but that would have made too much weel vs car
I'm very surprised with driving comfort! I was a bit scared it would get too hard, but I don't feel a difference in COMFORT mode between original 18 weels.
In SPORT mode, it got stressful on a daily drive, even with the original ones. So I configured the INDIVIDUAL mode to my liking
could have maybe gone for 21 but that would have made too much weel vs carI'm very surprised with driving comfort! I was a bit scared it would get too hard, but I don't feel a difference in COMFORT mode between original 18 weels.
In SPORT mode, it got stressful on a daily drive, even with the original ones. So I configured the INDIVIDUAL mode to my liking
Saw that you increase the power from 150HP to 207HP, which is high.
I will receive my 1.4 e-Hybrid soon and also want to increase the power. (not sure if a power win of 57HP is doable for the 1.4 e-Hybrid)
Which company did you went to? Was it in Belgium? or The Netherlands?
I'm from The Netherlands and know that JDEngineering and VAGTechniek are sone good company's........but also Mechellen is about 1h20mins drive for me., so doable.
I will receive my 1.4 e-Hybrid soon and also want to increase the power. (not sure if a power win of 57HP is doable for the 1.4 e-Hybrid)
Which company did you went to? Was it in Belgium? or The Netherlands?
I'm from The Netherlands and know that JDEngineering and VAGTechniek are sone good company's........but also Mechellen is about 1h20mins drive for me., so doable.
At the end I actually decided to not go for any tuning……and the 1.4 245hp hybrid version has more then enough power, so I will not spend any money on it.
Mooie auto hoor Stijn!
Ikzelf ben van het antwerpse en rijd met een cupra ateca.
Heb de wagen 2de hands gekocht en de vorige eigenaar heeft zich nogal weinig aangetrokken van de carrosserie...ben dus op zoek naar een bedrijf die de wagen terug krasvrij kan maken.
Ik las dat je daar werkt...zou je een offerte voor me kunnen laten maken?
Verstuurd vanaf mijn SM-G998B met Tapatalk
Ikzelf ben van het antwerpse en rijd met een cupra ateca.
Heb de wagen 2de hands gekocht en de vorige eigenaar heeft zich nogal weinig aangetrokken van de carrosserie...ben dus op zoek naar een bedrijf die de wagen terug krasvrij kan maken.
Ik las dat je daar werkt...zou je een offerte voor me kunnen laten maken?
Verstuurd vanaf mijn SM-G998B met Tapatalk
Hallo en merci!
We zijn gevestigd in Mechelen, neem maar eens een kijkje op www.was-co.be
Best wel eens langskomen zodat we de wagen kunnen inspecteren alvorens we een precieze offerte maken. Elke wagen en lak is verschillend, zeker als het om een 'gebruikte' gaat.
Grtz
Similar threads
