So I fitted the Polar Fis Advanced today, was going to follow a
guide I found on YouTube for a mk6 golf which I thought would be the same, which wasn't at all when I removed the trim for the
OBD port and found the red plug right at the front of the dash.
So I search for a
guide and found this,
http://www.auto-polar.com/forum/showthread.php?353-Fis-installation-in-a-Leon-Cupra-(1P)-(ANSWERED)
This meant going in through the back of the dash, removing the the wind screen trim, wiper motor and in through this link hatch.
Once removed just I just folded the sound proof back and the gateway was right there.
I plugged everything in and fed the wire and Polar Fis to the
OBD port so it's easier to get in and update if need.
Socket for the USB is pointing down to the brake pedal and the polar fis is cable tied to a bracket that the heat blower is held by.
All sorted so put the car back together and went for a test drive, and had a play with the mfd set up, very happy with everything, I'm going to have a go with the 0-60 timer later on and see how I get on.
Not sure what the oil temp being at -60 is, I'll have a play see what happens.
Just after I got home from my test drive, this arrived.
All I'm waiting on now is my Peron ic, which I was told 10 day delivery so should be here a week Wednesday.