-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
Folks. Can you adjust the bulb failure parameters or switch the function off? I've got high power LEDs but they trip the warning yet are working so I want to lower the setting to determine bulb failure.
Thanks
Tyler
Thanks
Tyler
Retrofitted the RNS315 to my 2008 Cupra and cant get the steering wheel buttons to work. The problem is that I cant see anything in the VDCS in the Navigations long code helper. I see the bytes and bits but no names next to the checkboxes. Maybe somebody can help me and look up which byte/bit are the following choises - "Shortpress Steering wheel buttons installed" and "Communication Instrument Cluster ... via BAP"?
Thats the genuine one:
http://www.ilexa.co.uk/acatalog/vagcom.html
With lifetime updates. Cant quote about Chinese stuff mate
http://www.ilexa.co.uk/acatalog/vagcom.html
With lifetime updates. Cant quote about Chinese stuff mate
Afternoon folks, searched and read many posts and can't find the one after, I'd like to adjust the auto lights on setting, blooming things are soooo sensitive, the lights come on if the sun hides behind a cloud(well almost), can this be set to be less picky?
Yes, any of the Ross-Tech official distributors in the UK. Just scroll to the bottom of the following page...
Hi all,
I have only recently been in contact with VCDS and I would like some insight from those who are more knowledgeable. I've got several questions, but I'll just go one at a time.
I've retrofitted an RNS310 which works perfectly.
Navigation works, steering wheel controls work and I've updated it's firmware also.
Recently, I ran an Auto-Scan on my car and I noticed two errors:
CAN Gateway - 01044 - Control Module Incorrectly Coded; and
Address 37: Navigation - Cannot be reached.
So, I went on to the Gateway and activated 37 - Navigation.
The change was accepted.
After this, I did another Auto-Scan but this time I had:
Address 25: Immobilizer Cannot be reached and I couldn't also access Centr. Elect. VCDS mentioned something about making sure the door were locked?
Afterwards, I reverted the change and unticked Navigation.
After this I could access Centr. Electr. and the Immobilizer was scaned without any problems.
Why was this?
PS: the driver's door was open during the scans.
I just noticed that I had all zeros @ the User Interface and Identification menu.
I think this could be problematic also with the 'equipment number invalid' error.
Do you think this could be a cause?
Thank you!
I have only recently been in contact with VCDS and I would like some insight from those who are more knowledgeable. I've got several questions, but I'll just go one at a time.
I've retrofitted an RNS310 which works perfectly.
Navigation works, steering wheel controls work and I've updated it's firmware also.
Recently, I ran an Auto-Scan on my car and I noticed two errors:
CAN Gateway - 01044 - Control Module Incorrectly Coded; and
Address 37: Navigation - Cannot be reached.
So, I went on to the Gateway and activated 37 - Navigation.
The change was accepted.
After this, I did another Auto-Scan but this time I had:
Address 25: Immobilizer Cannot be reached and I couldn't also access Centr. Elect. VCDS mentioned something about making sure the door were locked?
Afterwards, I reverted the change and unticked Navigation.
After this I could access Centr. Electr. and the Immobilizer was scaned without any problems.
Why was this?
PS: the driver's door was open during the scans.
I just noticed that I had all zeros @ the User Interface and Identification menu.
I think this could be problematic also with the 'equipment number invalid' error.
Do you think this could be a cause?
Thank you!
Cable for Leon FR Pre-Facelift
Can somebody point me in the right direction. I'm looking for a cable for my 2008 Seat Leon FR Pre-Facelift. Had a look on eBay but keep seeing leads that aren't compatible with Leon 1P. I'm assuming that is my model?
Can somebody point me in the right direction. I'm looking for a cable for my 2008 Seat Leon FR Pre-Facelift. Had a look on eBay but keep seeing leads that aren't compatible with Leon 1P. I'm assuming that is my model?
Very nice post!
I want to turn on the Seat Belt Warning haha
And also the numbers in the cluster when the cruise control is ON. Because I activated on the cluster with VCDS so I can watch the signal of cruise control.. but when I active it, km/hr is 0.
Sorry for my probably bad explanation in English.
Regards
I want to turn on the Seat Belt Warning haha
And also the numbers in the cluster when the cruise control is ON. Because I activated on the cluster with VCDS so I can watch the signal of cruise control.. but when I active it, km/hr is 0.
Sorry for my probably bad explanation in English.
Regards
Looks like its a simple language setting change for anyone that interested. I fond the info elsewhere.
Similar threads
