What did you and your MK2 do today?

-UzY-

Active Member
Jun 2, 2015
91
0
Managed to clip my wing mirror (Doh), mirror is not broken (phew) but is moved out of place and does not sit very well. Reckon it will need replacing or a bit of tlc to put back in it's place?
 

RikH

Texas Cowboy
Oct 17, 2005
2,474
0
Yorkshire
Attempted to fit the eBay led board numberplate lights - what a pile of crap.

No instructions, harness won't connect as the pins won't line up and it's so flimsy that on the first attempt the prongs bent!

Rubbish
 

kazand

Is powered by Medtronics
Jun 6, 2010
4,138
73
Brum
AAAANNNDDD, will be removing the mtec bulbs. Low beam pattern was tosh and not bright enough

Have you checked you have 12v bulbs? Some on here have ended up with 24v , which will be somewhat dim.......
P.S. if you ordered them following a link on a certain thread (kebabwarrior81 :p ), They'll be 24v.......... :cry:
 
Last edited:

KebabWarrior81

Active Member
Nov 4, 2013
1,841
3
Sandbach,Cheshire
Yep the H1 set i have are the 24v and are complete and utter garbage will be putting the stock ones back in when I get chance.H7 m-tec super whites are good but don't put out as much light as night breakers. However they are a Much crisper white light.
 

kazand

Is powered by Medtronics
Jun 6, 2010
4,138
73
Brum
Yep the H1 set i have are the 24v and are complete and utter garbage will be putting the stock ones back in when I get chance.H7 m-tec super whites are good but don't put out as much light as night breakers. However they are a Much crisper white light.

Sorry Craig..... ;)
 

EgyTuner

Active Member
Jun 5, 2015
24
0
Dubai, UAE
www.lap57.com
Car wash, and a picture ;)

cardubai.jpg
 
Nimbus hosting - Based solely in the UK.