No, I think it's only the larger-engined FR/Cupra models that get it. The 184 does, and the Cupra 280 does.
Edit: there's a thread for it on the forum titled "Soundaktor panel".
Last edited:
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
what did you and your mk3 leon do today
- Thread starter seatleon2012
- Start date
No, I think it's only the larger-engined FR/Cupra models that get it. The 184 does, and the Cupra 280 does.
Edit: there's a thread for it on the forum titled "Soundaktor panel".
Pedals
Fitted the Golf R Octavia VRS metal pedal covers someone else had posted that they had just ordered them and I thought I was replying to their post,makes a big difference aesthetics wise!
Fitted the Golf R Octavia VRS metal pedal covers someone else had posted that they had just ordered them and I thought I was replying to their post,makes a big difference aesthetics wise!
Do you have a link please, as a lot of them on ebay say left hand drive fit only.
I don't have a link unfortunately. I did buy them off ebay though. Just got to trawl through until you find right hand drive ones
Golf R Octavia Vrs pedals
I got my 3 pedals from Amazon £40 RHD model and defo look the real deal even came in a VW box with part numbers, straight and easy fit,though throttle cover took a bit of wiggling and levering to seat properly listed as :-
golf mk7 pedals, Passat B8
Also bought the creation Motorsport footrest plate to cover the plastic one but still to fit it as requires 3 bolts to secure,it's not an exact match to pedal design but the best looking option I can find!
I got my 3 pedals from Amazon £40 RHD model and defo look the real deal even came in a VW box with part numbers, straight and easy fit,though throttle cover took a bit of wiggling and levering to seat properly listed as :-
golf mk7 pedals, Passat B8
Also bought the creation Motorsport footrest plate to cover the plastic one but still to fit it as requires 3 bolts to secure,it's not an exact match to pedal design but the best looking option I can find!
Mine was at the dealers for replacement rear lights due to the common cracking issue.
They also replaced the rear high level brake light which had cracked right through where the rear washer jet is.
All done under warranty and cleaned the car too - thumbs up to Listers Seat Worcester
They also replaced the rear high level brake light which had cracked right through where the rear washer jet is.
All done under warranty and cleaned the car too - thumbs up to Listers Seat Worcester
Had rare day off work, weather was just right so gave car good clean.
Been waiting to use detailing products I got a while ago.
Washed, decontaminated paintwork with iron out and tar remover. Clayed.
Polished with autoglym super resin and sealed.
Wheels and trim treated, windows cleaned.
Really pleased with results.
Trying to add photos but can't work out how.
How do I get photos from photo album to post??
Been waiting to use detailing products I got a while ago.
Washed, decontaminated paintwork with iron out and tar remover. Clayed.
Polished with autoglym super resin and sealed.
Wheels and trim treated, windows cleaned.
Really pleased with results.
Trying to add photos but can't work out how.
How do I get photos from photo album to post??
Footrest
Well fitted the Creation Motorsport footrest today unfortunately can't post a pic yet as not enuff posts but really pleased with it very easy to do 1/2hour roughly
For those that don't like the fact that there is raised bolt heads I countersunk the plate about 4-5mm thick and bolted it with the supplied countersunk head bolts and didn't use the supplied cup washers nicer finish I think!
Well fitted the Creation Motorsport footrest today unfortunately can't post a pic yet as not enuff posts but really pleased with it very easy to do 1/2hour roughly
For those that don't like the fact that there is raised bolt heads I countersunk the plate about 4-5mm thick and bolted it with the supplied countersunk head bolts and didn't use the supplied cup washers nicer finish I think!
Superskoda are now selling a RHD footrest with a matching finish to the Golf R Octy Vrs and I presume the Cupra, but at €50+ p&p am more than happy with my mod compared to the plastic effort,fitted in the FR
Pick my new FR SC up a week on Thursday and I'm booked into there on the Saturday to get the front wrapped the same as that. It transforms the front of the carGot the front wrapped today! New place opened up in Glasgow! Cannot recommend enough!
Sent from my Nexus 9 using Tapatalk
Mine got washed yesterday then this morning treated the interior plastics with Autoglym vinyl and rubber care, done the same with the engine bay plastics then while the bonnet was open checked oil and coolant levels.
Similar threads
