What did you and your MK2 do today?

[Andy ap]

I had that fault code on my Cupra last year, its the EVAP system. Firstly i changed the EVAP valve (cant quite remember the valve number) which was the cheapest fix but wasnt successful so changed the charcoal canister and that sorted the problem. The valve was around £25 and the canister around £85 iirc. Dave from SERE sorted me out.

Spoke too soon the lights on again. Looks like ill be ringing the dealer that sold me the car to get him to replace it under warranty.

 

[Dan FR]

Is this similar to what i was talking about in that other thread a while ago?
whats this rtech kit you speak of?

Can not remember what we discussed to be honest

Link to the FB page: https://www.facebook.com/permalink.php?story_fbid=446286978883654&id=434795536699465

Better designed PCV blank, a turbo blank, inlet manifold blank and a few feet of pipe to vent to atmosphere.

my setup will re-use the 42DD catch can plate, blank up the ports not needed, then vent the cam and crank to atmos

 

[2G]

Sport mind sticker, 5 bhp added:

 

[Shawn-C-87]

Sport mind sticker, 5 bhp added:

That's atleast 7bhp as its black on white it's worth more!!

 

[cupra.al]

Can not remember what we discussed to be honest

Link to the FB page: https://www.facebook.com/permalink.php?story_fbid=446286978883654&id=434795536699465

Better designed PCV blank, a turbo blank, inlet manifold blank and a few feet of pipe to vent to atmosphere.

my setup will re-use the 42DD catch can plate, blank up the ports not needed, then vent the cam and crank to atmos

Cool thanks for that id have never known the kit had been produced im well happy with that have just phoned to order one so should recieve my kit soon.
My idea was a little different but not by much not bothered now as i think that kit is going to fly off the shelfs and every other company will be following suit with the design soon im sure.

 

[richicupra]

Can not remember what we discussed to be honest

Link to the FB page: https://www.facebook.com/permalink.php?story_fbid=446286978883654&id=434795536699465

Better designed PCV blank, a turbo blank, inlet manifold blank and a few feet of pipe to vent to atmosphere.

my setup will re-use the 42DD catch can plate, blank up the ports not needed, then vent the cam and crank to atmos

What happens to the front mounted diverter valve on the K04 cars? Be interested to see this fitted

 

[GS16LRHP]

New discs and pads front and back, easier than I thought.

 

[Dan FR]

Cool thanks for that id have never known the kit had been produced im well happy with that have just phoned to order one so should recieve my kit soon.
My idea was a little different but not by much not bothered now as i think that kit is going to fly off the shelfs and every other company will be following suit with the design soon im sure.

I would have bought one too had I not already had so many PCV and catch can related parts lying around going to waste.

What happens to the front mounted diverter valve on the K04 cars? Be interested to see this fitted

Totally unaffected and untouched mate

 

[Bunjo19]

What I did , changed leaking aircon condenser 2 hours also looked at what timing chain tensioner fitted to 2011 cczb through hole in case lucky last version fitted thank god

 

[nick-fr]

So this happened earlier

Door wont open and it doesn't look like the wheel was hit, luckily I have the incident on dashcam, not happy

Sent from my C6603 using Tapatalk

 

[ZiggyEP3]

Ouch that doesnt look good at all

Not just the door that's damaged either.

 

[Goldfinger124]

Anyone help me I need to know how to run a vacuum off my air vent boost gauge to the inside of the engine no idea


Sent from my iPhone using Tapatalk

 

[nick-fr]

No bit of the arch got hit aswell I'm hoping it's not as bad as it looks.

Sent from my C6603 using Tapatalk

 

[ZiggyEP3]

I know it looks like the wheel didn't get hit but it could easily have been tapped in at the front and so mess the tracking up.

 

[nick-fr]

That is true, I did drive it home and didn't feel any different so it's more a guessing game until the insurers get it in.

Sent from my C6603 using Tapatalk

 

[Ollie1990]

Got some new shoes

-staytuning|staymodified

Hey dude, is that the Seat diffuser?

 

[G4reth]

Had the FR lowered on H&R's. Very pleased with the result, actually improves the ride quality compared to standard. Highly recommend them to anyone thinking of buying them.

 

[Daniel M]

Had the FR lowered on H&R's. Very pleased with the result, actually improves the ride quality compared to standard. Highly recommend them to anyone thinking of buying them.

Stick some pictures up.

 

[Daniel M]

Hey dude, is that the Seat diffuser?

Standard Cupra R diffuser mate.

 

[G4reth]

Stick some pictures up.

As you wish. Even though you've seen it ha

Daniel's standard FR

Mine on H&R's

Obviously they'll settle down a touch too.