-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
Not today but Friday had it sign written for the garage tools a bit better than the daewoo
Lol the word tools shouldn't be in that post phone got a mind of its own
Um not shour if there is a message lol
I re-soldered the joints inside the module (one was cracked) then sealed the final door! My Leon is finally waterproof! I saw a Leon today all fogged up - so glad I don't have to put up with that all winter, and that musty smell.
So much water poured out when I took off the door trim, thankfully none of it was going in the car.
When I got the car a year ago I put velcro at the bottom of each door - this creates an air gap between the seal to let the water run out. Quick temporary fix that worked.
Photo taken in May when I was letting the carpet dry out - this side was still wet after a few months of nice weather, but then again how's the water going to evaporate with the carpet down.
So much water poured out when I took off the door trim, thankfully none of it was going in the car.
When I got the car a year ago I put velcro at the bottom of each door - this creates an air gap between the seal to let the water run out. Quick temporary fix that worked.
Photo taken in May when I was letting the carpet dry out - this side was still wet after a few months of nice weather, but then again how's the water going to evaporate with the carpet down.
Last edited:
Check around the speakers too, water can also come through there. Feel free to contact me if you need help, but you'll probably find all the guides on here.
Dodgy solder joints inside the module caused my central locking to play up, which also caused the alarm to go off at random times.
Toying with one of these:
http://www.awesomegti.com/034motorsport-density-line-complete-dog-bone-mount
Or individual powerflex bushes for my original torque arm. Thoughts or experiences would be appreciated?
Stage 2 mk1 LCR amd tuned 294bhp
http://www.awesomegti.com/034motorsport-density-line-complete-dog-bone-mount
Or individual powerflex bushes for my original torque arm. Thoughts or experiences would be appreciated?
Stage 2 mk1 LCR amd tuned 294bhp
I have it and like it, you might need to change idle rpm for the resonance to go away
Dogbone Powerflex'ed by ND-Photo.nl, on Flickr
This...
adds at least +5bhp 
And also managed to get Auto Windows via KeyFob using a free tool found on the net
And also managed to get Auto Windows via KeyFob using a free tool found on the net
And also managed to get Auto Windows via KeyFob using a free tool found on the net
you mean like this http://www.seatcupra.net/forums/showpost.php?p=3435336&postcount=329
Where did you get it, and how much?Early birthday present arrived todayjust got to wait till after MOT to fit it
Similar threads
