-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
BeezaDave's Mk4 Ibiza - Fresh wheels and lows!
- Thread starter BeezaDave
- Start date
If i can get the laptop off my dad 2nyt ill b able to post pics of the new wheels and the new grill i got
Here is a few pictures of the wheels and my new grill
Pic of wheels
Before picture with old wheels
After Picture with new wheels
Before with old grill
After with new chrome grill
Pic of wheels
Before picture with old wheels
After Picture with new wheels
Before with old grill
After with new chrome grill
Last edited:
Anthracite. Still waiting on the center caps. Ill upload a better picture soon when i get my cenee caps and car is all nicely cleaned. Might have the mirrors colour coded by the time i get my center caps
Thanks! Yeah I bought the cable on ebay (think it was for a mini) and it simply plugs into the back of your radio. You have to ground it using a small piece of wire on pin 14. Then just use the CD6 button to switch to aux.
This helped me a lot:
http://www.seatcupra.net/forums/showthread.php?t=306213
LeeA2L
Guest
LeeA2L
Guest
Quick update, cable is installed and works great, I would upload a picture but I've not succeeded 15 posts yet...
So I've been busy over the last few weeks. Got all the painting done and just about finished fitting everything. This was the beautiful sight of having everything freshly painted:
First thing on was the cupra spoiler:
Before:
After:
Side view:
Rear bumper was next. Had this bumper on the car already but I bought it second hand so it was the wrong red and also had a dent in the diffuser. Bought a new diffuser, got the exhaust hole plastic welded and got it sprayed gloss black:
All fitted:
I added new plates at the same time:
Which are held on with these:
Glued to the back:
My newest purchase was a cupra front bumper from Dave at SERE. Got the bumper painted, bottom lip and number plate recess done gloss black and all grills done gloss black:
Foglights are fitted but not wired up yet. Handles are also colourcoded. Next job is to get the new door mouldings back on (which are gloss black) but the glue from the old ones is a right b*tch to get off. Any suggestions? Also, anyone who has done this front bumper conversion before, any idea where the external temperature sensor fits now?
Wing mirror caps are colourcoded and will be put on as soon as I can source a replacement driver's wing mirror that doesn't cost an arm and a leg! Hope ye like
First thing on was the cupra spoiler:
Before:
After:
Side view:
Rear bumper was next. Had this bumper on the car already but I bought it second hand so it was the wrong red and also had a dent in the diffuser. Bought a new diffuser, got the exhaust hole plastic welded and got it sprayed gloss black:
All fitted:
I added new plates at the same time:
Which are held on with these:
Glued to the back:
My newest purchase was a cupra front bumper from Dave at SERE. Got the bumper painted, bottom lip and number plate recess done gloss black and all grills done gloss black:
Foglights are fitted but not wired up yet. Handles are also colourcoded. Next job is to get the new door mouldings back on (which are gloss black) but the glue from the old ones is a right b*tch to get off. Any suggestions? Also, anyone who has done this front bumper conversion before, any idea where the external temperature sensor fits now?
Wing mirror caps are colourcoded and will be put on as soon as I can source a replacement driver's wing mirror that doesn't cost an arm and a leg! Hope ye like
Last edited:
Looking well. I got paint work done there aswell. Ill post pictures when its buffed 1 more time. Wats up with ur drivers mirror
Thanks very much. Yeah I got a great deal on all the painting and very happy with the result!
Haha funny story. It wouldn't fold in and I pushed it a little too hard so now the cap doesn't sit in right and it whistles and it's just a right mess! So I'm just going to get one from a scrappies before I put on the new cap
Lol. Its easy done. My mirror wouldnt move either and i put all my weight on it and it moved so the caps could get painted. I changed the discs to drilled and groived 1s and they look well. How do you use a picture of your car as your profile picture?
Yeah mine didn't move haha. Go to user cp. On the left, under settings and options, click edit avatar. Then just select the photo you want to use and save changes
Door mouldings are the plastic strips that run down the doors.
Ah thanks. I got them painted there when i got my bumper fixed and ither stuff colour coded. My mate painted them on the car. Ill post pics soon of it as it needs a wash
NOOOOOOOOO!
God bless toffee wheels, took the glue off the sidestrips with so little effort.
What I was dealing with:
And a couple of randoms from when I test fitted the bumper:
Haven't had a chance but will have to get some decent photos soon.
God bless toffee wheels, took the glue off the sidestrips with so little effort.
What I was dealing with:
And a couple of randoms from when I test fitted the bumper:
Haven't had a chance but will have to get some decent photos soon.
Similar threads
