-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
What did you and your MK2 do today?
- Thread starter Tfsi_Mike
- Start date
New discs, pads and tires for the rear today. Plus found out I have a broken spring so might be time to look into lowering it.
Should only be around 95 ish. It is dependent on vehicle and how much work is required to access the fuel system.
That's what I thought! It's not exactly tough to access the fuel lines etc on the Cupra, especially with the engine cover off!
Sometimes on petrols they charge up to £30 for an emissions test before and after to show the difference it has made, would be worth checking this wherever you go. I had mine done but I'm a 2.0 TDI, And mechanic said mine was one of the easiest as it literally just involves pulling a hose off and putting one on.
Used the hangar at work to drop the oil and take the sump off to check the oil pick up pipe.
Probably due to changing the oil at least every 5k the pick up pipe was perfect, Ill probably fit the new one though seeing as its in the boot.
Taking the sump to Alex at AKS on Monday to have a boss welded on so I can fit an oil temp gauge.
when I bring the sump back Ill be putting a new filter on and sticking some Millers Nanodrive cfs in.
Probably due to changing the oil at least every 5k the pick up pipe was perfect, Ill probably fit the new one though seeing as its in the boot.
Taking the sump to Alex at AKS on Monday to have a boss welded on so I can fit an oil temp gauge.
when I bring the sump back Ill be putting a new filter on and sticking some Millers Nanodrive cfs in.
Last edited:
Fitted my HIDS
Just need darkness to fall to get the full effect
Ah HIDs in reflectors. My favourite
I've got HID's in reflectors have the the H7R which are pretty good to be fair. If you have the adjusters on the lowest setting they aren't dazzling at all.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Get them done fella , easy as you like only took 20 minutes. Yeah the barb/hook face in and the smooth side face out. I used a screwdriver to push them in, couldn't get them to say otherwise.
not keen on suede, but like the steering wheel.
booked in for stage 2 on tues with milltek dpf removal downpipe.
awaiting custom rear exhaust from nige at BCS in the next couple of weeks.
booked in for stage 2 on tues with milltek dpf removal downpipe.
awaiting custom rear exhaust from nige at BCS in the next couple of weeks.
Similar threads
