What did you and your MK2 do today?

[Rob_Talisman]

Cheers, mine turned up in the post today - the fitting kit they supply with it is shite isn't it! I used some decent screws that sit flush on the plate to secure mine.

How did you get behind it to secure it on to the footrest?

 

[jake]

 

[richicupra]

How did you get behind it to secure it on to the footrest?

There are two plastic screws/clips holding the piece of trim in place: one on the side of it and one behind the brake pedal.

 

[Rob_Talisman]

Found it thanks.


Sent from my iPhone using Tapatalk

 

[Rob_Talisman]

Started installing my puddle lights in the bottom of the door cards. Drivers door done last night.


Sent from my iPhone using Tapatalk

 

[jake]

Will need pics once done Rob, been putting that off myself

 

[Bignod00]

Started installing my puddle lights in the bottom of the door cards. Drivers door done last night.

Will need pics once done Rob, been putting that off myself

+1!

Defo worth a write up!

 

[Rob_Talisman]

Will need pics once done Rob, been putting that off myself

Few pics on here chaps.

I will do a write up/guide when i do passenger side. (its a twat to do btw)

http://www.seatcupra.net/forums/showthread.php?t=397685&page=5

 

[Rob_Talisman]

jesus what profile are they 4mm lol

 

[Robbo-K1]

+2 I wanna know how you've got on with those puddle lights Rob!

Haha 4mm profile! That photo by jake does look awesome though! I'd say a 35, maybe 40?

 

[Rob_Talisman]

Well they look good on the drivers side Adam, a pita to do though, ive run a feed from the drivers side A pillar to the footwell and then ill link all the feeds to that point to make life easier. was going to do all the doors but may just do both fronts now. will do the passenger side tom.

 

[bigbadjay]

Took it in to an indy for brake fluid and wheel alignment

Sent from my HTC One using Tapatalk

 

[Robbo-K1]

Well they look good on the drivers side Adam, a pita to do though, ive run a feed from the drivers side A pillar to the footwell and then ill link all the feeds to that point to make life easier. was going to do all the doors but may just do both fronts now. will do the passenger side tom.

Awesome Rob, sounds good!
Aye yeah, deffo easier doing it that way....save feeding and tucking wires in all down the passenger roof etc then too i suppose!

Brilliant mate, good work. Just had a look on the other thread and they look awesome! Very bright!

 

[Rob_Talisman]

My HID's have arrived

 

[jake]

there a 225/40/18 on an 8.5

 

[jake]

rob any pics of how there fitted to the door card?

 

[Rob_Talisman]

Its just a strip of leds stuck onder the door card. same as the footwell ones mate. TBH it looks horrid under the door card, but im not often flat on my butt looking up at them.

now ive the wiring there i may look at an improved version later on.

 

[Joshkcupra]

Ordered a new pair of discs and pads for the rear as they're looking a little worn!

 

[WeeG]

My brother put the leon in for it's second MOT as i'm currently offshore. Passed with flying colours and got through with the decat

 

[Bignod00]

My brother put the leon in for it's second MOT as i'm currently offshore. Passed with flying colours and got through with the decat