-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
Peter's Leon - *Mapped* *Soon to be Stealth*
- Thread starter Petey41
- Start date
Guys also, my key fob has stopped working, no LED or anything, any solutions??
Sent from my HTC One using Tapatalk
Sent from my HTC One using Tapatalk
Even after changing it, no difference,think a new key might be the solution..
Sent from my HTC One using Tapatalk
Tried adding contact too mate, reckon the board might have gone, gunna do the flip key upgrade
Sent from my HTC One using Tapatalk
Windows work fine as well as the central locking inside the car, just no remote locking. I do remember that before sometimes you would have to push the button on the remote several times before it worked
Sent from my HTC One using Tapatalk
That's a bit less of a worry, thanks for your help man! Would you have any idea how hard it is to reprogram? I only have the one key at the minute..
Sent from my HTC One using Tapatalk
This is translated from dutch. Maybe it can help.
1. It is necessary that both be used in the car keys supplied, both the key with remote transmitter (A) when the normal key (B) is used.
2. For synchronizing one has a maximum 30 seconds.
3. Key (B) is used to turn the ignition key and (A) is the key to be programmed.
4. Make sure the car is unlocked before starting. Programming
5. Turn the key (B) in the contact position between the positions of the steering wheel and start.
6. Connect with key (A) the end of the driver's door of the wagon.
7. Unlock and then lock the lock of the driver's door with the key (A) while holding down the button (Unlock 1) of the corresponding key is pressed.
8. Take finally the key (B) from the ignition.
1. It is necessary that both be used in the car keys supplied, both the key with remote transmitter (A) when the normal key (B) is used.
2. For synchronizing one has a maximum 30 seconds.
3. Key (B) is used to turn the ignition key and (A) is the key to be programmed.
4. Make sure the car is unlocked before starting. Programming
5. Turn the key (B) in the contact position between the positions of the steering wheel and start.
6. Connect with key (A) the end of the driver's door of the wagon.
7. Unlock and then lock the lock of the driver's door with the key (A) while holding down the button (Unlock 1) of the corresponding key is pressed.
8. Take finally the key (B) from the ignition.
Awh not too bad! I have vagcom so I'll get a key and give it a go, cheers mate!
Sent from my HTC One using Tapatalk
Similar threads
