what have you done to your car today ?

[LEE69]

x 1.25 or /0.8

It's mapped imho

 

[dgjdrummer]

Ok then, so g/s is a pretty accurate reading to go by?

Highest I had previously was 135g/s (169bhp) but I don't think I reached the top of the rev range then.

Have no receipts of it being mapped and car only had multi-spoke alloys and lowering springs when I got it.

EDIT: Thanks Lee

 

[LEE69]

Get it on a rolling road should be around £30 for a printout

 

[LEE69]

http://**************************/ is close to you and his rolllers are true

 

[dgjdrummer]

Cheers Lee, got your PM and will check them out!

 

[nd-photo.nl]

I also think its mapped

 

[dgjdrummer]

I also think its mapped

Cheers, it is starting to sound like it. Are there any other readings I could take (on Torque Pro) to see if it's mapped or not before going to a dyno?

 

[nd-photo.nl]

Unfortunately I dont know what the standard boost is, if can find that out you will know for sure without rolling. But I would recommend a roller session, or log using vcds

 

[dgjdrummer]

I've searched and have seen others say 1.5bar is standard map (mine is 1.7 peak with 1.4/1.5bar held), my boost does stay above 1bar all the way to 4.5k though. May have to just whack it on a dyno and see before I go bragging

 

[nd-photo.nl]

That would be best

 

[joshy514]

You should hope it isn't mapped dj, wouldn't see any advantage otherwise. £300 odd up though


Sent from my iPhone

 

[Ronin225]

Hit 70k in it, got slightly depressed as ive given it 55k of hard abuse and its starting to show
Then used my new impact gun to remove driveshafts and cheered myself up with how awesome it is
Changing oil, filter, fuel filter and plugs tomorrow

 

[Dougster]

Kicked it's **** in coming home from work on a deserted M8 in Glasgow!!

105k on the clock and still solid at 130 tonight.

 

[gordy41]

just done front door seals , drivers door peace of cake as it was original seal , passenger door a pig as someone has silconed it took twice as long to do , used butyl strip on both , now to try and dry carpets with dehumidifier

 

[Br!dges]

Fitted my new clutch last night with the Sachs 4 paddle plate and the biting point is really bad!!

It's not down to the plate as it's similar to OEM but do the linkages need a reset or is it another bleed of the system to get the pedal right?

Thanks

 

[bruceR]

Removed my arm rest and tightened the small screw on the bottom of the arm - it had worked loose - refitted and no more annoying squeak

 

[rossi46]

Six hours winter wash on the outside. See my readers ride for the progress

 

[Greavesy]

Finally stopped my Leon leaking!

 

[seatturbopower]

just done front door seals , drivers door peace of cake as it was original seal , passenger door a pig as someone has silconed it took twice as long to do , used butyl strip on both , now to try and dry carpets with dehumidifier

exactly did the same today as well mate easy job to do as well, and someone cowboyed the one door link to follow but once done one door rest it easy as.
http://www.seatcupra.net/forums/showthread.php?t=330176&highlight=repair+door+seals a flat blade screwdriver got the trim off

 

[RaviR50]

today was spent installing HIDs into the fogs, retinted them to a more yellow look and i resprayed all the grill from matte black to gloss black. Gloss black looks soo much better IMO

Mine and the Monsterwraps 'interceptor' volvo C30

the fogs are lovely and bright that i can use them as dipped beam without blinding people

i was gonna fit a set of 4300k HIDs for the dipped but when i put one in it turned out to be more like a Halogen!!