-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
what have you done to your car today ?
- Thread starter seatcupramad23
- Start date
Not sure. Just seem to boost as hard as standard air box. Possibly the noise making it feel like it should be faster than it sounds. Also the recirc into the box is a little chavvy for me. But we will see how it goes
I thought the same. Boggy down low with that filter on.
Sent from my GT-I9505 using Tapatalk
Washed all the family cars: mine, the lasses & the young lads
Also received my new fan spray washer jets - to be fitted
Also received my new fan spray washer jets - to be fitted
Hit a pheasant in my car, smashed the front grill. GRRRRRR. If any one has or knows the part number for the lower centre section for it, please PM me. My car is a pre facelift Cupra on a 51 plate. Thanks.
Found my d/s door seal to be letting water in
You can buy a roll of sticky sealant tubing stuff from ebay - no idea what's called . just cut to size, peel back to reveal stick layer and apply. i replaced all 4 seals when i got my car as they were leaking. takes about 25 mins per door. there's a guide on here somewhere.
Found my d/s door seal to be letting water in
http://www.seatcupra.net/forums/showthread.php?p=3255713#post3255713
what jets did you get?? i want some fans myself
Hi mate, they are off a Ford Focus. Fitted them 2day and they look OEM, however, the spray was a bit too high so had to pack the back of them with a piece of rubber grommet that came with them.
]Got round to finishing fitment of front mount and forge map pipe after not knowing I needed one and blue petering a temp fix
Had a nightmare with it, but its done and holding 10-12psi fine.
So along with my 3" downpipe and 2.5 decat system am about ready for a remap..
Still a little bit more to take off inside of bumper, just dnt sit quite right,
Had a nightmare with it, but its done and holding 10-12psi fine.
So along with my 3" downpipe and 2.5 decat system am about ready for a remap..
Still a little bit more to take off inside of bumper, just dnt sit quite right,
Thought So as I am fitting my welly cooler at the weekend on my lcr seemed a good idea to check
Similar threads
