So today I had niki remap my car he wanted my car as R&D so I booked a few Days off work and headed down there had to raise my car the day before
mods on the car Simota carbon air box , Milltek resonated with decat
I didn't really know what I was having done as I asked for launch control and if its possible to make it pop more I was told by a few people no it can't be done yet on the R32s
So I turned up at ****** bright and early and got told I've been researching for a few weeks were doing launch control and pops and no lift shift I was shocked and excited
Niki started the car had been mapped before unknown to me it made 256bhp and 233ftlb
Turns out they locked the ecu so his tools wouldn't let him in so out came the ecu and he had this plug full of wires and this allowed him to do some witch craft and enter in the back door (ohh err) the ecu was ready
After putting it back and getting on with the mapping I came away with 269bhp and 260ftlb most of this was done with his tiv mapping (torque intervention) as you know the graphs are all ways wobbly now mine are smooth
He then added launch control its set to 5200 rpm and flat shift , means over 5k I can keep my foot planted and change gear with out taking my foot off the throttle
Away I went to test car feels amazing no more snappy 1st gear pulling away an nice liner throttle , launch control is aweosome as is the flat shift its so smooth , the car its self pulls really hard its lovely , now some pics and videos
The graph
Pics and video
http://i169.photobucket.com/albums/u210/dan_cupra_r/156edb2aa94cf8e09a915a8c7f86903c.mp4
More like a explosion than a pop
http://i169.photobucket.com/albums/u210/dan_cupra_r/62c90a9ca394d1bed92653fbb35e4c5d.mp4
And this one in a tunnel , speakers up
http://i169.photobucket.com/albums/u210/dan_cupra_r/49e3fe0034bd469181f94d0d1f95a71a.mp4
I strongly recommend any one with a R32 to get down there he is awesome