The correct way to do an N249 bypass the full guide

[Dan20v]

You still got this on your car ?

 

[domin8or]

You just need 1 bit of pipe from inlet to FPR and one from the other inlet nipple to the DV. If you have a boost gauge use a T of the FPR has the best vacumn. Dose that help mate.

Confused . com

I thought there was only 1 inlet on underside of manifold ?

I have boost gauge which is connected at present running of the "T" near the DV,with the other "T" near the FPR splitting from the nipple on the inlet to feed up to DV.

 

[mc funbot]

FPR is fuel pressure regulator mate it's the round think on the fuel rail with the vac line to it. And use 4mm vac of ebay

 

[Dan20v]

done this today took no longer than 30 mins thanks

 

[mc funbot]

Get pics up guys

 

[Dan20v]

Trust me my engine bay is standard and rusty

 

[mc funbot]

Still a bypass and still a job well done

 

[Dan20v]

Has anybodys engine light cam on after doing this ?

 

[mc funbot]

If you leave the bits plugged in your fine. All my lights are off. All the ones I've done have been fine.

 

[Dan20v]

They are all plugged in both of them i get vag.com on it see what it says

 

[mc funbot]

Let me know mate.

 

[DuamoLCR]

Is you inbox working yet funbot?


Sent from my iPhone using Tapatalk

 

[mc funbot]

I've had nothing mate.. When you free? We can get this done

 

[P6THX]

Need help as currently have my car in bits! Ive got an LCR 225 the pics r different to what i can see on the engine bay. I dont have these '3' pipes under the inlet mani... Heres some pics so far,

Also where is the egr valve?!


Dave

 

[mc funbot]

Can you put a pic up with all the pipes on the rocker? Looks like the tt set up. Still need your pipe from dv to inlet and fpr to inlet. Leave the n249 in still. And will be ok.

 

[P6THX]

Can you put a pic up with all the pipes on the rocker? Looks like the tt set up. Still need your pipe from dv to inlet and fpr to inlet. Leave the n249 in still. And will be ok.

All done now i found an LCR guide


Dave

 

[inch0408]

quality guide, did it with no probs or lights. although my dv is virtually silent now.

 

[Harfi]

Mine seems to be going into limp even with the n249 bypassed I put a new turbo on the other day and its only done it since

 

[mc funbot]

I would not of thought an n249 would put you in limp mode. I've tried all the ways plugged resistors in an unplugged never did this. Turbo all ok no leaks from gaskets or your pipes you put back on?

As for a quiet DV what are you running. I have a oo7 on my golf with a filter and sounds great.

 

[domin8or]

Why did you say there are 2 nipples on Inlet 1 for DV pipe & 1 for FPR when i asked yet in pic you say only 1 there ?????
http://i826.photobucket.com/albums/zz186/martyn1986/IMG_1899_zpsc695d567.jpg