Need those side skirts! Iv thought about cutting the A5 "blades" but would much prefer a straight fit!
Info needed!!!!
Info needed!!!!
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
What did you and your MK2 do today?
- Thread starter Tfsi_Mike
- Start date
tools from pebbles ...
I dont understand all this lath stuff but I would like to know how to get me a set of these.
My English is a little bit horrible I think but I try to write some notes about sideskirts from R20. They are very nice accessories and have nice contour. Problem that price for couple is horrible. They are a little bit longer and their ends are problem for hitch as front as rear side.
I did their from fiberglass and tuning their. My opinion that are good for front bumper MY 2008 Cupra/FR with front accesories by JeDesign. New bumper MY 2010 is ugly from fabric and hard to modify its. Details photos you can find on my web site www.cila.sk
I did their from fiberglass and tuning their. My opinion that are good for front bumper MY 2008 Cupra/FR with front accesories by JeDesign. New bumper MY 2010 is ugly from fabric and hard to modify its. Details photos you can find on my web site www.cila.sk
its not easy as look. Again I must made shape and tuning originals laths from Audi S5. Their shapes is different than has Leon. My laths fit as up side as down side. More photos on my web site ...
This is only first testing product. I will do their from carbon too ...
its not easy as look. Again I must made shape and tuning originals laths from Audi S5. Their shapes is different than has Leon. My laths fit as up side as down side. More photos on my web site ...
This is only first testing product. I will do their from carbon too ...
Sounds like you've had to modify them quite a bit
Sent from my GT-I9300 using Tapatalk 2
Getting these stuck on to rear AERO defuser today and sprayed black along with behind the number plate .
Am i the first to do this on a btcc aero defuser as i carnt find any pic anywhere
Hopefully its done today so i will post pics later
Am i the first to do this on a btcc aero defuser as i carnt find any pic anywhere
Hopefully its done today so i will post pics later
Any body know what the benefits of installing an aftermarket panel filter is? Like a K&N or a Pipercross? Thanks.
Alright. I installed a Pipercross air filter yesterday so I thought a panel filter would be a nice addition, guess not! Thank you, mate.
I installed a pipercross panel filter and to be honest, i didnt feel any difference.
I might be looking to buy the carbonio intake though. Apparently it has a cone filter inside a carbon box which shields the heat. Also apparently the carbonio adds noise because of the cone filter!!! But for £260 its a real downer =[
What's an intake? Is that like another name for an air filter? If so, 260 is definitely too much money for the hassle, mate. The Pipercross air filter didn't give me much performance-wise, but noise-wise it's a beauty. It transformed the engine's noise from a standard 1.6 into, perhaps, a turbo-charged one or even better.
My piper cross panel filter didn't even give me any more noise sounds totally standard.
But then again mines a turbo and diesel so maybe it's different :S
I was thinking about these:
http://www.awesomegti.com/car/seat/leon1p/carbon-intake-2-0tdi
OR
http://www.awesomegti.com/car/seat/leon1p/carbonio-intake-2-0-tdi
Which one is best? Im looking for noise mostly but DO NOT want to lose even 1 bhp ^^
Let me know
Last edited:
I'm truly sorry mate I neither have a turbo nor a diesel so I cannot really answer that question. I think you're better off creating a thread here and asking others about their opinions. They both definitely look impressive!
According to some online research I've conducted, free-flowing don't do much in terms of performance and do nothing noise-wise so I guess they're just a waste of money; they do, however, last longer than the stock panel filters, so I guess that's the only benefit.
Air filters, on the other hand, are different. They tend to increase a little bit of performance and a little bit of noise. In my case, performance wasn't much but noise is definitely outstanding and much improved now. Air filters are also pretty cheap so it's a win-win situation. I'll just have to clean it every two months or so, and I hope taking it out and putting it back in is going to be easy. I might just pay my friend a visit every time I want to and have him do it for me.
According to some online research I've conducted, free-flowing don't do much in terms of performance and do nothing noise-wise so I guess they're just a waste of money; they do, however, last longer than the stock panel filters, so I guess that's the only benefit.
Air filters, on the other hand, are different. They tend to increase a little bit of performance and a little bit of noise. In my case, performance wasn't much but noise is definitely outstanding and much improved now. Air filters are also pretty cheap so it's a win-win situation. I'll just have to clean it every two months or so, and I hope taking it out and putting it back in is going to be easy. I might just pay my friend a visit every time I want to and have him do it for me.
Getting these stuck on to rear AERO defuser today and sprayed black along with behind the number plate .
Am i the first to do this on a btcc aero defuser as i carnt find any pic anywhere
Hopefully its done today so i will post pics later
Are these designed for the aero kit? If not what are they designed for and how did you get them? Ta.
Na they are made for a focus rs but i have modded them to shape my defusser . Got them off kev at triple r composites . Carnt wait it should look the dogs nuts
.
Getting these stuck on to rear AERO defuser today and sprayed black along with behind the number plate .
Am i the first to do this on a btcc aero defuser as i carnt find any pic anywhere
Hopefully its done today so i will post pics later
arent they from that guy who makes the splitter triple plastics or something. they are teh spats for the mk1 rear end i believe?
Beat u to it
. Check this out if ur interested in this modhttp://www.seatcupra.net/forums/showthread.php?t=349653
Just a thought R.E. diffuser fins and AUDI A5 Sideskirt "blades" would it be worth a shot with these triple r composites so people can get what they want? Id love both of these
Similar threads
