My Black Mk3 Ibiza Cupra
- Thread starter CupraSean
- Start date
P.s saw a couple of cupras tonight out in brum....
The one I see always parked up by the college in longbride, silver with ronal turbo wheels
The other was in shell petrol station, the went into great park cinema, followed me in.
The one I see always parked up by the college in longbride, silver with ronal turbo wheels
The other was in shell petrol station, the went into great park cinema, followed me in.
yeh it just about misses speed bumps, Not yet, havent got clean pictures. but hopefully i will this week
sooooo the weekend before last i had a big weekend working on the car an finally fitted my intercooler.
i created a bracket to move the radiator back to fit the cooler with minimal bumper cutting. I then made some brackets to fit onto the crash bar and welded them in place, i then spreyed them to match the crash bar (black).
i fitted cooler and then piped up the cooler using the orginal map pipe (want to change in near future). i replaced all pipes apart from the boost pipe coming off the turbo.
after that i decided to cold side relocate the dv. i had the stuff lying around for it for ages so was good point to do it.
i then cut the engine cover to fit over the DV and i personally think looks quite cool. need to sprey engine cover now though to match.
Finished Product, i will be putting mesh back on though....
loving car at the moment, and since flipping dv sounds alot cooler !! but god damn i need to lower it an get those back wheels out the arches lol
i created a bracket to move the radiator back to fit the cooler with minimal bumper cutting. I then made some brackets to fit onto the crash bar and welded them in place, i then spreyed them to match the crash bar (black).
i fitted cooler and then piped up the cooler using the orginal map pipe (want to change in near future). i replaced all pipes apart from the boost pipe coming off the turbo.
after that i decided to cold side relocate the dv. i had the stuff lying around for it for ages so was good point to do it.
i then cut the engine cover to fit over the DV and i personally think looks quite cool. need to sprey engine cover now though to match.
Finished Product, i will be putting mesh back on though....
loving car at the moment, and since flipping dv sounds alot cooler !! but god damn i need to lower it an get those back wheels out the arches lol
Last edited:
That's a quality idea with cold side t piece wish I had thought of that I've just forked out on a custom SFS hose to fit my 57mm piping and the 63mm throttle body!
Youve done a tidy job of fitting the cooler too, you leaving that standard flat piping on it?
Youve done a tidy job of fitting the cooler too, you leaving that standard flat piping on it?
Cheers pal. I'm hoping not to keep the flat map pipe on for too long. It's the only flat/standard pipe left post turbo. Still need a top, but money is bait tight at the mo. when I can though I will be investing in a map pipe an a tip. Slowly getting there but....slowly hahaha
Yeah the t pieced turned out working well. It all turned out better than I hoped so I was chuffed.
You going to the big meet? Be good to see your car in the flesh. You don't live too far away at all so will have to meet up one day, and berg as I know he lives ur way doesn't he.
Cheers
Yeah the t pieced turned out working well. It all turned out better than I hoped so I was chuffed.
You going to the big meet? Be good to see your car in the flesh. You don't live too far away at all so will have to meet up one day, and berg as I know he lives ur way doesn't he.
Cheers
Slow and steady always wins the race
Yeah going to the meet looking forward to it actually be nice to see yours aswell probably make me miss my black Cupra lol
Yeah have meet up where abouts are you then?
Yeah bergs round the corner from me lol and mc funbot not to far away he usually pops in to me work lol
Yeah going to the meet
looking forward to it actually be nice to see yours aswell probably make me miss my black Cupra lolYeah have meet up where abouts are you then?
Yeah bergs round the corner from me lol and mc funbot not to far away he usually pops in to me work lol
few minor updates.
catch can fitted, just needs plumbing up....
Moved my blanking plug from the DV relocation as it decided to pop out under boost the other day...which was interesting lol
relocated solenoids to complete N112 and N249 bypass and removal.
brought some stickers and finally put tow loop on..which im unsure about, think it will look better once its slammed !
Even modded the ipad lol
And played with mates new RC touring car, soon to be drift car since showing him the new "Outsiders" DVD by Driftworks !
http://s1105.photobucket.com/albums/h360/MiniBlade/?action=view¤t=VIDEO0020.mp4
were fitting the drift wheels as we speak in work hahaha
Peace out for now !
catch can fitted, just needs plumbing up....
Moved my blanking plug from the DV relocation as it decided to pop out under boost the other day...which was interesting lol
relocated solenoids to complete N112 and N249 bypass and removal.
brought some stickers and finally put tow loop on..which im unsure about, think it will look better once its slammed !
Even modded the ipad lol
And played with mates new RC touring car, soon to be drift car since showing him the new "Outsiders" DVD by Driftworks !
http://s1105.photobucket.com/albums/h360/MiniBlade/?action=view¤t=VIDEO0020.mp4
were fitting the drift wheels as we speak in work hahaha
Peace out for now !
Last edited:
Similar threads
