leon projector headlight pics anyone ??

[gazrhys]

You could fit a bulb holder in the main body by the side or in between the projectors and fit a LED bulb in there that should work. I know what you mean about the rings that's the main reason i took the other one off, and now i quite like the one, its different as all the other kits you see have two.

Im with you on that not to keen on the 2 rings do like yours tho it is different to the norm . I do fancy something like the hawk eye lights (not full rings) might have a look at that could simply do what you did with the one you sprayed over really and cojust cover the top of the rings

 

[Booya]

Iphone camera

I have to say with the rings on it looks so damn cool. I will be tenacious about this photo

Sorry guys I'm really struggling to get pics with my lights on. It's just too difficult...I'm just a failure

 

[seantdi]

so when you switch on your main beams dose it take a few seconds for them to reach full brightness? or is it instant?
that little switch you mentioned above has me confused lol

 

[Phillc]

so when you switch on your main beams dose it take a few seconds for them to reach full brightness? or is it instant?
that little switch you mentioned above has me confused lol

More or less instant. if you imagine a circle (the light) and the top half is covered which is how the dipped is, when you put the main beam on half of the cover flips up so the circle (Light) is now only a quater covered, giving a bit more light.

 

[seantdi]

so when you have your dips on both projectors are lighting? and when you switch on high beam the flap lifts up and the light is brighter??

 

[Phillc]

No because i removed all the parts on the main beam so there is no cover inside the light, but you could fit them as you say.

 

[seantdi]

ah i get you now.. i think lol. so when you have your dip beam on one projector is lighting and when you switch on the main beam the cover goes up on the dim giving out more light while the second projector warms up?

i dont think having the 4 projectors lighting up on dip beam would be a good idea.. im sure it is illegal..

 

[LEE69]

As long as they are dipped beam, should be fine.

 

[Phillc]

As Lee said, not a problem.

 

[seantdi]

dose the law not say your dip light can only be a max of 55w?

 

[LEE69]

Hope not, car passed many years ago before hids with an 80/100 lol

 

[LEE69]

You would use hids anyway in projectors and they are a max of 55w anyhow.

 

[seantdi]

ya i know my hids i have now are only 35w but two of them on at the same time in each light unit would be more than 55w lol.. ah well wont be doing them for a while now.. my starter is f**ked

 

[LEE69]

How can two the same wattage be double

Be 2 x 35w

 

[seantdi]

so if i had them set up that both projectors came on for dips in each light unit that would be 4 x 35w which would be more than the 110w limit that you are allowed by law over here

 

[LEE69]

No you can't add them up they are individual bulbs so will be 4 x 35w

I'm considering doing my standard spare lights now 4x 55w lol

 

[CJRamze]

so if i had them set up that both projectors came on for dips in each light unit that would be 4 x 35w which would be more than the 110w limit that you are allowed by law over here

 

[LEE69]

I was being nice

 

[CJRamze]

I dont mean it in a nasty way, I just thought it was funny about combining things

 

[LEE69]

Don't get me wrong, it is funny