LCR W.I.P Update K04 Hybrid- F23 Here, mini review page 50

rsmith

Robbie
Apr 28, 2004
2,797
1
Tipperary, Ireland
cheers mate sent him a pm. so what hybrid you going for?

YAHOOOOOOOOOOOOO, Just ordered a CR Hybrid K04, turns out there hybrid is the same as the TD stage 4 hybrid without all the mumbo jumbo BS spec and he said with the correct setup 320bhp+ could be achieved and wait for it, its cheaper to, i bought the turbo outright rather than an exchange, while the price difference is only £100 or so this will offset the price of the 440cc injectors.
 
Last edited:

Murdered LCR

Wide mouthed mofo
Sep 9, 2006
6,646
8
Murder Inc.
Nice one mate but 320 ? Lol what drugs they taking , I'm guessing you rr when it's l fitted set up will be around the 295-305 bhp , that's my guess , really want to no what the mani is like tho be good to get pics with them together To see the difference
 

paul-murphys

efr 6758 here i come
what about bill he made 318 on the same turbo on a s3. and thats without methanol.

and how much you pay for the turbo mate? i brought mine 2nd hand off here, just need to fit it with the same mani and also the water meth then get the car mapped and see what she pulls. im hoping for 320 too but only time will show what will actually pull.
 

Murdered LCR

Wide mouthed mofo
Sep 9, 2006
6,646
8
Murder Inc.
255ftlb tho I would rather have higher torque and lower bhp , bhp pub talk torque is what matters , think it was 314 bhp as well that's my guess tho I'm not an expert :)
 

brad1

Guest
Nice one mate but 320 ? Lol what drugs they taking , I'm guessing you rr when it's l fitted set up will be around the 295-305 bhp , that's my guess , really want to no what the mani is like tho be good to get pics with them together To see the difference

I dont think you understand, not all hybrids are crap, the two you refer too were both using standard manifold and exhaust downpipe, get a uprated manifold and downpipe and the difference is probably night and day ;)
 

rsmith

Robbie
Apr 28, 2004
2,797
1
Tipperary, Ireland
Nice one mate but 320 ? Lol what drugs they taking , I'm guessing you rr when it's l fitted set up will be around the 295-305 bhp , that's my guess , really want to no what the mani is like tho be good to get pics with them together To see the difference
Oh ye of little faith:p

what about bill he made 318 on the same turbo on a s3. and thats without methanol.

and how much you pay for the turbo mate? i brought mine 2nd hand off here, just need to fit it with the same mani and also the water meth then get the car mapped and see what she pulls. im hoping for 320 too but only time will show what will actually pull.

Paid £970 to my door, Id say more TBO, Bill got 314hp on a standard mani.

255ftlb tho I would rather have higher torque and lower bhp , bhp pub talk torque is what matters , think it was 314 bhp as well that's my guess tho I'm not an expert :)
He mentioned there was a problem reading the correct torque so i cannot see any reason why over 300lbft cannot be achieved

I dont think you understand, not all hybrids are crap, the two you refer too were both using standard manifold and exhaust downpipe, get a uprated manifold and downpipe and the difference is probably night and day ;)

Correct, i dont see any reason why i should not get a high figure, 320+ hopefully. WMI, High flow Mani, 3"Dp, race cat(aka full BF TB), Injectors, FMIC, Rods, etc....
 
Last edited:

Nef

Looking Rather Dappa
Mar 30, 2009
626
0
Cambridge
Have just sat and read though the whole thread, engine bay looks amazing! Really love the colour of the wheels, they go perfectly with the car. Some mega mods you have done mate, im sure it'll be a monster once finished, nice job!
 

rsmith

Robbie
Apr 28, 2004
2,797
1
Tipperary, Ireland
Haha yes I do have little faith so prove me wrong please :) and say haha told you so lol , can you get pics of both manis together please ,

Opto Dyno here i come :lol: Yeah once the mani gets in from the US i will post up pics for u all

Have just sat and read though the whole thread, engine bay looks amazing! Really love the colour of the wheels, they go perfectly with the car. Some mega mods you have done mate, im sure it'll be a monster once finished, nice job!

Cheers lad

Im sure you will crack into the 300's easy mate :)

If i don't i'll eat my hat, literally.
 
Last edited:

paul-murphys

efr 6758 here i come
hi mate is this the 1 you got and do you have to state if for left or right handed vehicle. also the kit you need you got a link for that?

i look forward to seein yours as mine not going to be ready till end of oct once engines back in car.

also i brought that mbc so thanks for the heads up :)
 

brad1

Guest
Paul you have spent loads on your car don't go for a hybrid it's a waste , go gt28 at the least , gt30 ftw

If youve done rods and internals to strengthen the engine, then the way forward is a big turbo otherwise it will be a waste, if you have standard internals and want a bit more oommppphh, then hybrid :)
 

paul-murphys

efr 6758 here i come
im hoping will engines cost 4 k all in for rebuild :) but will be good for 8500rpm and 650 bhp if i want to in the future, have a slight overbore so nearly a 1.9, heads ported and polished, just not decided if bt or stick with hybrid till get bored of it or skip the step and go bt
 

brad1

Guest
im hoping will engines cost 4 k all in for rebuild :) but will be good for 8500rpm and 650 bhp if i want to in the future, have a slight overbore so nearly a 1.9, heads ported and polished, just not decided if bt or stick with hybrid till get bored of it or skip the step and go bt

Skip the hybrid and go BT ;)
 
Chris Knott Insurance - Competitive quotes for forum members