Good for you. Thing is there is some hype, the cables that work have an interface built into them. Just a cable with the connectors either end will not work.
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
Leon 1P Vag-Com Cable ** Canbus OBD Diagnostics**
- Thread starter Knight_Rider
- Start date
Good for you. Thing is there is some hype, the cables that work have an interface built into them. Just a cable with the connectors either end will not work.
I enabled the lock chirp today, I originally avoided this before as I had it enabled on my mk4 Ibiza for about 30 seconds before disabling it again as it just beeped the horn. However on the mk2 leon it is actually a chirp. I still think the bouble chirp on unlock is a bit OTT so I left that off.
Good times with VAG_COM for £25
Anyone know what cimema/garage lighting is?
Good times with VAG_COM for £25
Anyone know what cimema/garage lighting is?
When i took my Leon to SEAT the other week to get valued, the salesman asked if it was a non standard alarm. I just told him a different garage activated the beeps, so he didnt think i had been messing with it.
And for anyone who is interested, i still have my cable for sale.
And for anyone who is interested, i still have my cable for sale.
Has anyone managed to get this working on a facelift Leon?
Software and cable both installed okay using the 812.4 version supplied (And it's never been connected to the web since then) but when I try and do an auto-scan I get an error saying I need a licensed version and it stops part way through the scan?
Then when I try and access module 46 to enable the alarm chirp I am getting an error displayed saying it cannot contact controller?
I'm using XP
Software and cable both installed okay using the 812.4 version supplied (And it's never been connected to the web since then) but when I try and do an auto-scan I get an error saying I need a licensed version and it stops part way through the scan?
Then when I try and access module 46 to enable the alarm chirp I am getting an error displayed saying it cannot contact controller?
I'm using XP
Has anyone managed to get this working on a facelift Leon?
Software and cable both installed okay using the 812.4 version supplied (And it's never been connected to the web since then) but when I try and do an auto-scan I get an error saying I need a licensed version and it stops part way through the scan?
Then when I try and access module 46 to enable the alarm chirp I am getting an error displayed saying it cannot contact controller?
I'm using XP
I get the same problem from time to time - 'licensed version required' - either 704 or 812 software on XP.
To get rid of it I just close the software, disconnect cable and then plug back again and it usually works - not a perfect solution but gets me around the problem.
Hope it works for you
Has anyone managed to get this working on a facelift Leon?
Software and cable both installed okay using the 812.4 version supplied (And it's never been connected to the web since then) but when I try and do an auto-scan I get an error saying I need a licensed version and it stops part way through the scan?
Then when I try and access module 46 to enable the alarm chirp I am getting an error displayed saying it cannot contact controller?
I'm using XP
I've had that once or twice. Exit VAG_COM, reseat the cable in the car input socket and try again. To ensure a good connection hold the back of the cars input socket and give the plug a good push.
Well a bit of an update I did what Nath said and made sure the cable was plugged in securely and I managed to get Vag-Com working and it completed the Auto-Scan
But still can't get into module 46![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
keep getting an error saying no response from controller
Don't know if this is because my car is a 2009 facelift FR and something is different from the non FL version but 46 is the only module that wont load!
Any ideas?
But still can't get into module 46
keep getting an error saying no response from controller Don't know if this is because my car is a 2009 facelift FR and something is different from the non FL version but 46 is the only module that wont load!
Any ideas?
Well a bit of an update I did what Nath said and made sure the cable was plugged in securely and I managed to get Vag-Com working and it completed the Auto-Scan
But still can't get into module 46
Don't know if this is because my car is a 2009 facelift FR and something is different from the non FL version but 46 is the only module that wont load!
Any ideas?
Silly question, have you selected 1p Leon ?
Just been and done the boot popping with VCDS
On mine its Module 46 ,Byte 3 then tick option 3
Its pretty useless without the Extra power strut tho,Im not sure if its because ive got the rear spoiler aswell but mine pops but doesnt actually clear the Mechanism so it pops and then locks again
On mine its Module 46 ,Byte 3 then tick option 3
Its pretty useless without the Extra power strut tho,Im not sure if its because ive got the rear spoiler aswell but mine pops but doesnt actually clear the Mechanism so it pops and then locks again
Well a bit of an update I did what Nath said and made sure the cable was plugged in securely and I managed to get Vag-Com working and it completed the Auto-Scan
But still can't get into module 46
Don't know if this is because my car is a 2009 facelift FR and something is different from the non FL version but 46 is the only module that wont load!
Any ideas?
I can't connect to 46 too.
My car is a Leon FL 2010 1.8TSI DSG and my version is 908.
Anyone know if the cable in post 36 will work on a 54 reg VW Sharan and what version of vag-com do you need for this car?
Thankyou.
Thankyou.
Similar threads
