Great results, Will
Did you log it on the rollers? What g/s was it pulling if so?
Hi Damien
I did log it, but only for boost and timing
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
Hi Damien
I did log it, but only for boost and timing
Hi Damien
I did log it, but only for boost and timing
Must of been able to dial in some good timing in these temps
Yes indeed. I always accurate calculate the timing though, allowing a % correction for extremely high temps.
Deleted member 13581
Guest
Deleted member 13581
Guest
Do i get anything as i was the one to get the closest guess to the actual result
Just the pleasure of knowing you guessed the closest. Well done sir.
My bad - I thought yours was pretty much standard apart from the zorst.
I know the BLT engines seem to get near on 150-160bhp but didnt realise the ASZ's were higher than quoted aswell!
Spose -2 will help things! But a FMIC is definitely going to be needed.....
Hope you got a video Mike!
Bloody hell...you go out for a day and it all kicks off! Just got home, so more to come shortly...
more to come shortly does that mean you got your trim changed?
im considering going to performance torque now when i get my car mapped its between will or bill for me. seing your results and others is making me think will is a good choice.
im considering going to performance torque now when i get my car mapped its between will or bill for me. seing your results and others is making me think will is a good choice.
P-Torque Stage 1 remap
Well folks, just got back from a good days drive up and down the country. Luckily no dramas with the snow etc as it was motorway all the way!
First off, a big thanks to Will at P-Torque. Great chap and really knows his stuff, well worth the drive for this remap.
A bit dirty after the drive...
On the rollers...
All done...
Obviously the conditions didn't really lend themselves to me having a proper play with the finished results, but it seems awesome so far!
A badly scanned graph, but you get the idea...
More to come...
Well folks, just got back from a good days drive up and down the country. Luckily no dramas with the snow etc as it was motorway all the way!
First off, a big thanks to Will at P-Torque. Great chap and really knows his stuff, well worth the drive for this remap.
A bit dirty after the drive...
On the rollers...
All done...
Obviously the conditions didn't really lend themselves to me having a proper play with the finished results, but it seems awesome so far!
A badly scanned graph, but you get the idea...
More to come...
Last edited:
brad1
Guest
Graph looks good, im sure with a fmic and a map tweak, the power dip right at the end will hold better to the redline with less of a dip
Great figures Mike! Bet your pleased with the results
Well pleased with the map!
Car feels like it wants to go as soon as you press the loud pedal. Feels like it has loads of omph for overtaking etc. Was going very steady on the way home because it was so cold/icey... Will be good to play when it is dry and I don't have a TV in the back!Graph looks good, im sure with a fmic and a map tweak, the power dip right at the end will hold better to the redline with less of a dip
Graph looks great doesn't it... so impressed with the power hike! FMIC will be on the cards, but not until next summer probably...
Exhaust news
Well, I discovered that there was a Powerflow dealer right near P-Torque (Will has used him before and rates his work...) Took the Ibiza there after the remap (on the way home) and 20mins later I had a different tip on the exhaust! Its a slash cut design, much better than the old one. Will see how long I still like the exhaust for.
Some very crap videos (shot on my phone)
DYNO RUN OLD TIP http://www.youtube.com/watch?v=rUhnIsU86-0
NEW TIP http://www.youtube.com/watch?v=GGSeJ63sMCk
Well, I discovered that there was a Powerflow dealer right near P-Torque (Will has used him before and rates his work...) Took the Ibiza there after the remap (on the way home) and 20mins later I had a different tip on the exhaust! Its a slash cut design, much better than the old one. Will see how long I still like the exhaust for.
Some very crap videos (shot on my phone)
DYNO RUN OLD TIP http://www.youtube.com/watch?v=rUhnIsU86-0
NEW TIP http://www.youtube.com/watch?v=GGSeJ63sMCk
Last edited:
Looks much better now, Mike
Cheers Damo. I like the look of it now... bit loader than standard.
Will was well impressed by the sound it made, especially when I said how much I paid for it...
Thought you were looking at a oval tip?
Just need a down pipe and a FMIC now
Just been thinking that its been 2 years this month since I went for my stage 1
Didn't have any ovals in stock and this one was on my original short list...
FMIC will be on the shopping list next year. The list keeps on getting bigger though!
*EDIT*
I've also got a yellow spring in my Forge 007p now too, more thanks to Will!
Last edited:
Similar threads
- Samuel.perkins
- Readers Rides (SEAT)
