Gooner_Mike's Ibiza FR 20vt

[Altech]

Altech's was a bit "optimistic" on standard power too! Hmmmmmmm.

Get a video with the new zorst!

Mine was 147hp standard. That was with PD160 intake, Green Filter and exhaust. Not optimistic seeing as most TDIs make over the manufacturers claims

At the mother-in-laws in London picking up a TV. Will post updates when I get home... this is typed on my phone!
VERY pleased so far... taking it very easy though! Guesses of final BHP figure?

201bhp

 

[Ad Lav]

lol

I knew it was a 1.8T... honest!

 

[m0rk]

lol

Is it a BLT engine? They tend to put out a wee bit more than the old ASZ engine...

I'm guessing 193 bhp and 300 lb/ft

I think you might be a bit out on all counts, what with it being a 1.8T

Anyway

207bhp/225lbft

 

[Ad Lav]

oops

I knew that! What a spanner...

OK - re-guessing 198 bhp and 228 lb/ft

 

[Ad Lav]

Mike has a 1.8 T

I forgot that people on SCN do actually drive petrol cars...

 

[P-torque.co.uk]

Hi Guys

I will let Mike tell you what power he made, but I will give a small clue. The FR runs K03S turbo, the ambient temp today was -2.0, and I ran a nice tweaked map on the car.

Oh, and 163hp on this model is very normal considering the temp today. Normally we'd see about 155hp.

So, any new guesses?

 

[m0rk]

What boost did you peak it with?

 

[P-torque.co.uk]

Hey Mark

In the conditions today we were overboosting at 21psi...

I also changed Mike's DV spring to the yellow version to maintain boost more efficiently...

 

[Damoegan]

Looks like your pushing these a little further now after pushing mine with standard exhaust on, Will

My guess, 218bhp and 235lb/ft.

 

[m0rk]

Looks like your pushing these a little further now after pushing mine with standard exhaust on, Will

My guess, 218bhp and 235lb/ft.

That's where I'd put it with a bit more boost.

 

[Damoegan]

That's where I'd put it with a bit more boost.

Yea, normal stage 1 map boost was 17-18psi, Mark.

 

[P-torque.co.uk]

Close. Slightly lower torque, slightly higher hp.

I must stress the ambient temp today in the workshop was reading -2.0. Compared to a ambient temp of say 15, you can gain 10 - 15hp on these, so the boost will peak that little higher for a short peak on the dyno.

 

[Damoegan]

Still great numbers for a stage 1 map, Will

He's gona need a FMIC in the summer to hold the power though

 

[Breezapom]

Still great numbers for a stage 1 map, Will

He's gona need a FMIC in the summer to hold the power though

 

[brad1]

Im guessing 228bhp 227ftlb torque

 

[P-torque.co.uk]

Im guessing 228bhp 227ftlb torque

Blimey, thats very good!

I'm sure Mike won't mind, as he doesn't seem to be about at the moment..

He made 228hp and 230lbs/ft I think... sure he will confirm. As I mentioned to Mike though, on a normal day 215hp would be more like it.

 

[brad1]

They are excellent results from stage 1. Do i get anything as i was the one to get the closest guess to the actual result

 

[Deleted member 13581]

Superb results. Nice one.

Hes not on cause he is out playing with it in the snow.

 

[Damoegan]

Blimey, thats very good!

I'm sure Mike won't mind, as he doesn't seem to be about at the moment..

He made 228hp and 230lbs/ft I think... sure he will confirm. As I mentioned to Mike though, on a normal day 215hp would be more like it.

Great results, Will

Did you log it on the rollers? What g/s was it pulling if so?

 

[P-torque.co.uk]

They are excellent results from stage 1. Do i get anything as i was the one to get the closest guess to the actual result

Afraid not, sorry