NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!
I knew you'd have to do a mod one day that I didnt like!
-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!
I knew you'd have to do a mod one day that I didnt like!
NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!
I knew you'd have to do a mod one day that I didnt like!
Really? You just wait...
Why? Gonna get ripspeed mats, ripspeed flip out headunit, ripspeed bee sting aerial and ripspeed alloys too?
Why? Gonna get ripspeed mats, ripspeed flip out headunit, ripspeed bee sting aerial and ripspeed alloys too?
Just gonna crash my car through Hellfrauds mate... 
I meant, just wait until you see pics of the repeaters!
Haha!
That would be cool......
Ok, well I'll wait for the pics.....then I'll say I dont like it.
Ok, well I'll wait for the pics.....then I'll say I dont like it.
That's more like it...
Todays mods
N249 bypass
Decided to give this a go this morning.
Removed the DV vac pipe form (red circle) and joined it to the t-piece (green circle). Removed original pipe from t-piece in green circle and have left that unattached.
Ran a new vacuum pipe from the one-way valve (grey thing just below red circle) to the small box on the left of the engine. Left all other pies in-situ in case I want to revert back to original set-up!
Before...
After...
Went for a brief test drive but didn't notice any real changes just yet!
Smoked side repeaters
To cut a long stroy short... fitted one, didn't like it as it didn't fit properly and the bulb in the back was a bit of a bodge-job. Removed and now back to standard!
Just a picture to compare the colour of the originals and the smoked set!
N249 bypass
Decided to give this a go this morning.
Removed the DV vac pipe form (red circle) and joined it to the t-piece (green circle). Removed original pipe from t-piece in green circle and have left that unattached.
Ran a new vacuum pipe from the one-way valve (grey thing just below red circle) to the small box on the left of the engine. Left all other pies in-situ in case I want to revert back to original set-up!
Before...
After...
Went for a brief test drive but didn't notice any real changes just yet!
Smoked side repeaters
To cut a long stroy short... fitted one, didn't like it as it didn't fit properly and the bulb in the back was a bit of a bodge-job. Removed and now back to standard!
Just a picture to compare the colour of the originals and the smoked set!
Last edited:
mike...are they that bad (smoked side repeaters)...i was thinking of getting a set?..what was wrong with them?
That looks smart, you have room for another two next to it
They are OK but... the bulb holder doesn't fit in the back properly (you just have to push it in and it doesn't really "click in" or anything). The unit sits proud of the body when its in place (about 1mm but its obvious and doesn't look right). Because I'm a bit anal and for these two reasons I have not fitted them. Want them?
I might get some tinting spray and do the originals.
Here's how my 'bay looks, Mike
I kow you ahve got rid of all of the N249, SAI and somethign else (can't remember) but I will leave it in situ so that it can returned to OEM at some point. When you removed the SAI, did you have to add a resistor anywhere? Is it worth doing or is it just to tidy up the engine bay?
did you take photos of them on mike? would be good to see what you said that they dont fit flush and a tad proud??
Similar threads
- Samuel.perkins
- Readers Rides (SEAT)
