-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
Now that is modding on the cheap...
I did this today and although it sounds much nicer and louder i don't think there's any gain from it. Never heard a TDi sound so meaty!
Did you drill your box?
Yeah, about 20 holes in the middle of the bottom part. When its idling theres a nice low rumble and at 2500-3000 revs its sound great. Its like i've put on a new exhaust!
Been driving it a bit over the weekend and it might feel a little more responsive but that could just be wishfull thinking.
Ljones
Guest
anyone know where cheapest/best place to get green filter and feed?? filter around £47 on looking
for 225 lcr
for 225 lcr
I just bought one of these: http://www.green-filter.co.uk/product_info.php?manufacturers_id=59&products_id=205221
And one of these: http://www.green-filter.co.uk/product_info.php?products_id=101010
And will be smooothing and adding holes to my airbox over the weekend!
i have got a pipercross panel filter if any1 is intrested only done about 50miles £20 in my pocket and it is yours!
Now... as a Geography teacher I have to inform you that there are only 50 American states!
I finally did mine yesterday...however the drill that took the 16mm bit didn't work...and the only other bit I had was 6mm for the mini drill that did work.
I didn't notice much of a change in sound really...so I think I'm gonna have to get a 10mm bit and redo the holes, and add some more to the sides.
Also notice you didn't put any holes in the far left...is there a reason for that?
My air feed only went as far as the battery as it didn't fit any further. Is this as far as yours went? Did you leave the sort of plastic socket thing for the oem air feed on? Behind the headlight cover that the battery cover slots into.
I didn't notice much of a change in sound really...so I think I'm gonna have to get a 10mm bit and redo the holes, and add some more to the sides.
Also notice you didn't put any holes in the far left...is there a reason for that?
My air feed only went as far as the battery as it didn't fit any further. Is this as far as yours went? Did you leave the sort of plastic socket thing for the oem air feed on? Behind the headlight cover that the battery cover slots into.
Last edited:
The feed pipe will only go as far as the back of the head light unless you have the relocation bracket's to move the battery over.
When you say left hand side do you mean the side next to the engine ? if so I did'nt drill that side cos I thought it would be more likely to suck in warmer air.
I did take out the plastic bit that hold the old pipe in place, it's a bugger to get out and I ended up snaping mine to get it out.
When you say left hand side do you mean the side next to the engine ? if so I did'nt drill that side cos I thought it would be more likely to suck in warmer air.
I did take out the plastic bit that hold the old pipe in place, it's a bugger to get out and I ended up snaping mine to get it out.
Similar threads
- Question
