There are guys running way more power than this in the states, I dont consider it an issue.
-
Hey Guest one of our sponsors Progressive Parts is running Black Friday and Cyber Monday offers - more details here
There are guys running way more power than this in the states, I dont consider it an issue.
In states those guys drag racing with slicks and the power levels/torque is way more than what Dan is going to use.
+ well treated gears could handle much more
Last edited:
this sounds like a serious beast now
i was running 360bhp in my old Impreza and it was totally spine-breaking!!
4WD was a bonus though!! how you getting the power down?? i running 155BHP diesel A4 and get the traction light on in 3rd
Stu
i was running 360bhp in my old Impreza and it was totally spine-breaking!!
4WD was a bonus though!! how you getting the power down?? i running 155BHP diesel A4 and get the traction light on in 3rd
Stu
this sounds like a serious beast now
i was running 360bhp in my old Impreza and it was totally spine-breaking!!
4WD was a bonus though!! how you getting the power down?? i running 155BHP diesel A4 and get the traction light on in 3rd
Stu
Well the current power is a bit of a problem in the wet. I basically never put my foot down on a standstill though, I normally apply full power when im already on the move, so its not such a problem in normal driving
The diff im getting will help great so everyone tells me.. so looking forward to that...
Good news though hopefully, should have my rods tommorow or tuesday
Last edited:
I think they are coolant hoses mate.
I have a tap into a boost line where my forg valve used to be, its on the right hand side just underneath the end of my modded engine cover, nearer the front of the engine. I'll see if I can get some pics up.
I have a tap into a boost line where my forg valve used to be, its on the right hand side just underneath the end of my modded engine cover, nearer the front of the engine. I'll see if I can get some pics up.
U mean your old Forge Dump valve? So is the standard DV a Forge DV007p cuz my mate told me it was? And where's that? Under the engine cover??
Oh and FYI 1 of the hoses on the left is not fluid but did not provide any suction for vacuum & the other we couldn't get off
U mean your old Forge Dump valve? So is the standard DV a Forge DV007p cuz my mate told me it was? And where's that? Under the engine cover??
Oh and FYI 1 of the hoses on the left is not fluid but did not provide any suction for vacuum & the other we couldn't get off
I meant the forge Diverter valve for the FSI T engines.
The standard diverter is not forge no, its a VAG part.
The diverter valve location is sligtly different on the FR/sport and cupra engines. The diverter valve is located o the turbo in mine, but on the cupra, its at the front of the engine quite easily viable near the top, slightly to the right.
U mean your old Forge Dump valve? So is the standard DV a Forge DV007p cuz my mate told me it was? And where's that? Under the engine cover??
Oh and FYI 1 of the hoses on the left is not fluid but did not provide any suction for vacuum & the other we couldn't get off
Forge DV007P is a 1.8T dump/diverter valve, so your mate needs to stop telling you things.
Dump/Diverter valve on the TFSI Cupra is located at the front of the engine as Dan says.
You can see below the Forge DV - FMFSITVR which is the part for the Cupra fitted to mine.
The large hose which runs from the DV round to the intake is a remote vacuum line for the DV and is standard on the Cupra.
The older TFSI like Dan's and the FR's have the DV located behind the engine on the turbo.
Forge DV's on the TFSI are a metal mechanical piston valve controlled by an electrical solenoid.
The standard VW DV is an all in one unit encompassing a built in solenoid and rubber sealed plunger.
Last edited:
anything that can snapdriveshaft is cool
![[B)]](/forums/styles/seatcupra/oldforumsmileys/shades.gif "Cool [B)]")
love what you have done to it
a true sleeper.
anything that can snapdriveshaft is cool
Even a hydraulic press?
Thats an old pic there Mark - You got a pic with the Dbilas fitted?
anything that can snapdriveshaft is cool
love what you have done to it
a true sleeper.
on my latest developments, I had a run of 644 NM (475 Lbft)!!
on my latest developments, I had a run of 644 NM (475 Lbft)!!
How are things with that Dan? Any further update since our confab the other day?
Yer old pic but just used it to illustrate the point.
This is a more recent pic.
Anyway this is taking Dan's thread of his topic.
Sorry Dan. 
![[:@]](/forums/styles/seatcupra/oldforumsmileys/furious.gif "Furious [:@]")
Similar threads
