forge DV

[CupraR_Lad]

Or you could try Green Cotton panel filter dude? I've seen lots of people give them positive reviews

Sounds good to me!got a link to the item?

 

[b1nuzz]

http://www.greenfilters.co.uk/m59/SEAT/index.html?cat_id=1090&filter_id=1090&page=1

 

[CupraR_Lad]

Thanks mate,
This one here right?

http://www.greenfilters.co.uk/m59/SEAT/p200855/SEAT_LEON_CUPRA_R_1,8L_i_TURBO__20V_225hp_(03>)_-_Single_Cone_Induction_Kit/product_info.html

 

[George]

http://www.greenfilters.com/

edit: bit late on the uptake haha

 

[CupraR_Lad]

Thinking about getting one of these,can anyone recommend it?


http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190101DV&product=FMDVSPLTR

 

[Damoegan]

Thinking about getting one of these,can anyone recommend it?


http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190101DV&product=FMDVSPLTR

There not that populare as people have problems with them.
Most people (me included) go for the 007P http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190101&product=FMCL007P

 

[CupraR_Lad]

There not that populare as people have problems with them.
Most people (me included) go for the 007P http://www.forgemotorsport.co.uk/content.asp?inc=product&cat=190101&product=FMCL007P

This is what i have on my car atm!is there anyway i can make it louder?

 

[D.K]

Even if you put a Split-R on it wont be very loud, A remap and an open cone filter or a modded O/E airbox will help but they are still not very loud.
Stick with your 007 and do the above mods.

 

[Damoegan]

This is what i have on my car atm!is there anyway i can make it louder?

Forge TIP and a open cone filter and it will be louder mate.

 

[CupraR_Lad]

Even if you put a Split-R on it wont be very loud, A remap and an open cone filter or a modded O/E airbox will help but they are still not very loud.
Stick with your 007 and do the above mods.

Ok I think i will go for the Green Cotton open airfilter first and see how it that changes it!will the green cotton increase inlet temps?

 

[D.K]

Yep.
If you want to keep the intake temp's down then mod the O/E airbox.
http://www.seatcupra.net/forums/showthread.php?t=198039&highlight=airbox+smoothing+guide

 

[CupraR_Lad]

Yep.
If you want to keep the intake temp's down then mod the O/E airbox.

Rite ok!how do I go about modding the O/E airbox? Thanks...

 

[krisbutler02]

so what way is the loudest way to fit the dv?

 

[D.K]

Rite ok!how do I go about modding the O/E airbox? Thanks...

have a read of this.
http://www.seatcupra.net/forums/showthread.php?t=198039&highlight=airbox+smoothing+guide

 

[big eck]

I have the exact dump valve as you cupralad and just modded my original air box and the DV noise is much louder and very noticable from inside the car. Mine was silent to begin with.

 

[Mylo]

so what way is the loudest way to fit the dv?

Have a play mate, no two cars are going to sound the same

 

[Markyboyt]

so what way is the loudest way to fit the dv?

Wearing something like this while your fitting it will probably be quiet loud, defo wake the neighbours up

 

[ryan106]

From what I have read on here fitting it in reverse makes it louder I am going to do it to mine at the weekend hopefully so be interesting to see, believe its perfectly fine to do it like this.

 

[DannyC87]

i found that a smoothed and drilled airbox is very similar in loudness to an open cone filter - certainly loud enough for people to comment when first in the car! the dv can be orientated either way, it is only a simple valve. When I reversed mine the woosh turned to a metallic chirp; i've since returned it to standard direction. The N249 bypass made my dv significantly louder; not sure why!

 

[ForgeMotorsport]

nice n simple
http://jonnyjetta.blogspot.com/