mehmet_vw
Guest
dude ı have 17'' et35 and my whells are 205 40 17'' my lowers are 6-4 cm KW but my wheels rub and hits to my mudguards when ı am turning .Do you have that problem an have can ı figure out . thank you
dude ı have 17'' et35 and my whells are 205 40 17'' my lowers are 6-4 cm KW but my wheels rub and hits to my mudguards when ı am turning .Do you have that problem an have can ı figure out . thank you
mehmet_vw
Guest
but when ı asked everyone about it they told me paint can get off .And then ıf ı do thıs what will happen to paddle box
You will need to have it done at a panelbeater or spraypainter, and what is a paddle box?
Have not done much to the car yet again, just cleaned the engine bay, also found a slight oil leak from the cam pulley seal.
Fitted the stock airbox aswell.
Car is off to tuning wednesday next week.
Fitted the stock airbox aswell.
Car is off to tuning wednesday next week.
Thanx crezz,
Didnt relocate it, just fitted a smaller reservoir bottle, but want to relocate it.
Didnt relocate it, just fitted a smaller reservoir bottle, but want to relocate it.
Had the LM reps made black, and also the roof done in matt black.....gives the car a bit more of a aggresive feel to it now.
Some pics from our clubs show and shine event the past weekend.
Some pics from our clubs show and shine event the past weekend.
SEAT's are VW's, just different face.
I think thats a really good example, it looks like it was meant to be like that.
I've had two Polo's of my own
Nice mate. Although I would have never done those awesome wheels black. Liked them a lot more when they were shiny..
For the rest, as I mentioned on a earlier page, best looking polo with an as s out there
For the rest, as I mentioned on a earlier page, best looking polo with an as s out there
So this december holiday was a busy one, replaced most of the suspension parts, subframe, control arms, ball joints, Audi TT bushes. But im still sitting with a knocking noise on pullaway and sometimes when coming to a stop, ive re-torqued every single bolts but still cant figure out what it can be.....cv joints? Shock mounts?
Onto the pics:
Subframe sourced from a scrappy
Old subframe removed and motor supported
Some of the new parts used
Old subframe was a bit knackered as hit a speedbump the one night a bit to fast
And everything back together.
Onto the pics:
Subframe sourced from a scrappy
Old subframe removed and motor supported
Some of the new parts used
Old subframe was a bit knackered as hit a speedbump the one night a bit to fast
And everything back together.
Fitted a 13 row oil cooler to the abf, made a huge difference to the oil temps and pressure.
Cooler
Sandwich adapter
Hydraulic hoses i had made up to the lenght required
Cooler fitted and pipes running along the front of the aircon condensor
And all done, with the bumper back on, you cant see a thing.
Cooler
Sandwich adapter
Hydraulic hoses i had made up to the lenght required
Cooler fitted and pipes running along the front of the aircon condensor
And all done, with the bumper back on, you cant see a thing.
Venom
Guest
Similar threads
