Need a new induction/filter setup

[EZ Tutty]

Hey,

I know it's been covered a few times and i have searched, but not really found a definitive answer.

I currently have a green filters open cone, i've had it on for a while now although it's never given me any issues, i'm pretty sure it must be affected by heatsoak/high temperature air.

So i'm looking for some kind of filter setup that keeps the filter and intake temps a bit lower, but it must also provides a good noise from the 007 d/v (i'm so vain i know )

I've been looking at the Jabba setup with the heatshield, but it's rather expensive.

Also i've been looking at where i could put a cold air feed, however i'm struggling due to still using the standard IC. (FMIC is a project for next year, when i've got over the financial hit of buying a house! ).


Any recommendations?


EZT

 

[Reuvers]

BMC box maybe?

 

[ibizacupra]

Dynatwist? - made by Green - £170

 

[Mat]

what bill said.

that's what's on mine IIRC, still get a nice sound from the DV if you're that vein

 

[Myki da Pyki]

The biggest Jetex cone filter you can get and stick it down in the wing

 

[EZ Tutty]

Been looking at the dynatwist, and i quite like the look of it, only thing is where to i run the cold air pipe to ? can i just shove it in the wing?

also how does the dynatwist compare to the jabbasport filter & heat shield?

 

[p34ch3y]

CAI all the way mate the sounds are AWESOME trust me ,

 

[Riko]

I have been wondering about changing my filter also. Would any of the above be better performance and sound over the BCM CDA?? Really wanting a loud grunt/suck...

 

[ibizacupra]

Ibiza mk3 Dynatwist feed pipe (80mm) goes up into inner wing where the std one went, just enlarge the foam fitment the std snorkle went thru to secure it.

 

[stani540]

make your own jabba kit up with a large jetex filter and the jabba heat shield!

shield costs about 50 quid and the cone is less!

 

[p34ch3y]

if you want people to hear all the sound outside the car as well as inside,then a CAI is the way foward

 

[p34ch3y]

trust me you get a real nice induction roar with an echo an as for the dv fook me it dos sound loud atmos loud!! ive had the all ,ive had a jabba one dyntwist ,ram air,an none of them come close to this CAI from ebay for the golf/jetta,,,..........you need to get one,i moded mine so so that the filter sits in the wing rather than low to the ground

 

[james_666]

question where did you ge tht pipe from i been afterone for ages but cant for the life of me find one

 

[p34ch3y]

question where did you ge tht pipe from i been afterone for ages but cant for the life of me find one

as said ebay http://motors.shop.ebay.co.uk/items...trksid=m270.l1313&_odkw=1.8t+cai&_osacat=9800

 

[stani540]

these fit straight in to the cupra?

 

[p34ch3y]

these fit straight in to the cupra?

errr not quite mate,not strate on a small amount of moding is needed

 

[Reuvers]

peachy what do you put on the little nipple then?

 

[p34ch3y]

peachy what do you put on the little nipple then?

a rubber cap i got from work

 

[Reuvers]

I was gonna say, becuase you don;t actually run a hose there right?

I know that for other cars they run a line from the nipple on throttle body...but in your case its blanked off then?

 

[p34ch3y]

I was gonna say, becuase you don;t actually run a hose there right?

I know that for other cars they run a line from the nipple on throttle body...but in your case its blanked off then?

no hose on mine at all as the SAI system is all blanked off for me