Yeah, although no fault codes at all it was sending my boost crazy, overboosting to 1.8 BAR! Might try the Bailey DV26 instead. 
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
-
The forums will be offline for maintenance on Friday 15th November at 10pm for up to an hour. Thank you for your patience.
- Status
Just had a look through all your pics mate. How many dv's have you had?I must of counted 4 or 5
And that does not include the ones from the beginning.
Just want to enjoy driving it! Although still to fit is the oil cooler and Walbro fuel pump, will do them sometime quite soon, but in no hurry!
yes - show me
will upload them off my phone today/tomorrow and post them up
cracky cracky
Once she's run in we need some logs to mull over.
How low are your skirts off the floor Rob as i need to see whether your new car jack will be low enough for my car.
How low are your skirts off the floor Rob as i need to see whether your new car jack will be low enough for my car.
Liran TIG-ART
Guest
Good that it's up and running again better than before.
Perhaps you can get to the UKMKIV v Seatcupra.net RR at Awesome in November once it fully settled and mapped. I think the day will heavily feature B/T cars although I don't think there are that many Golf's converted to my knowledge.
Perhaps you can get to the UKMKIV v Seatcupra.net RR at Awesome in November once it fully settled and mapped. I think the day will heavily feature B/T cars although I don't think there are that many Golf's converted to my knowledge.
Dunno m8, Awesome is kinda far away for me.
Got some new pics, of the density line mounts, manifold and water swirl pot.
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/mount1.jpg
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/mount2.jpg
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/mount3.jpg
I painted the mounts before fitting, 2 coats etch primer then 2 coats metallic silver. They are fantastic mounts, engine and tranny feel taught and smooth without any harsh vibrations. I went with street density engine and tranny, plus track density dogbone mounts.
I fitted a water swirl pot from an Escort/Fiesta RS turbo to the top radiator hose when the system was empty, should be doing a good job of removing air from the cooling system, I removed the 4-way plastic union and fitted the swirl pot instead, sprayed it satin black before fitting.
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/pot1.jpg
New TIG-ART manifold is turning some pretty shades of gold and purple already!
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/mani5.jpg
Next job is the oil cooler but will be having a break for a while before I do that.
Got some new pics, of the density line mounts, manifold and water swirl pot.
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/mount1.jpg
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/mount2.jpg
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/mount3.jpg
I painted the mounts before fitting, 2 coats etch primer then 2 coats metallic silver. They are fantastic mounts, engine and tranny feel taught and smooth without any harsh vibrations. I went with street density engine and tranny, plus track density dogbone mounts.
I fitted a water swirl pot from an Escort/Fiesta RS turbo to the top radiator hose when the system was empty, should be doing a good job of removing air from the cooling system, I removed the 4-way plastic union and fitted the swirl pot instead, sprayed it satin black before fitting.
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/pot1.jpg
New TIG-ART manifold is turning some pretty shades of gold and purple already!
http://i312.photobucket.com/albums/ll330/SonicBlueLeon/mani5.jpg
Next job is the oil cooler but will be having a break for a while before I do that.
Plastikote metallic silver and Wurth acid etch primer, 2 coats of each. Very easy paint to use, goes on well and dries quick. I saw it on a Ford Escort Cosworth rebuild thread and the guy used it on his gearbox etc. and it looked great.
Got my USRT Walbro pump installed today, pretty easy with the wiring harness, the hardest part was hooking up the yellow wire to fuse #28, which powers the OE pump relay. Now it's all installed you can hear the Walbro priming up when you open the drivers door, same as the OE pump!
Next job is the Mocal oil cooler.
Got my USRT Walbro pump installed today, pretty easy with the wiring harness, the hardest part was hooking up the yellow wire to fuse #28, which powers the OE pump relay. Now it's all installed you can hear the Walbro priming up when you open the drivers door, same as the OE pump!
Next job is the Mocal oil cooler.
jamiebennett81
Guest
I bought a full wiring harness along with the pump, both from USRT, so it was nearly plug and play.
http://www.usrallyteam.com/index.php?main_page=product_info&cPath=10_45&products_id=412
http://www.usrallyteam.com/index.php?main_page=product_info&cPath=10_45&products_id=412
- Status
Similar threads
- blackandyellow
- Readers Rides (SEAT)
