My (MY07) Leon FR

[Syphon]

Nice. Silver looks great and shows off the lines of the car very well. Especially loving the side on the move shot

Scott

 

[STOCKY]

BBS CH's are ET50. But I put spacers on the back ones, just a few mm's.

Cool I ordered mine with that offset also, so mine should look as good as yours do. Was worried I might have ordered the wrong offset but from your pictures I think I have made the right decision.

 

[MDS]

Those wheels look Hot on that car.

Congrats.


Fine taste

 

[TristanLeon20VT]

Cool I ordered mine with that offset also, so mine should look as good as yours do. Was worried I might have ordered the wrong offset but from your pictures I think I have made the right decision.

I see that you have ordered a Canywhite FR. I think it would be great if you gave the wheels a black coating.

 

[TristanLeon20VT]

 

[JonoUK]

Waaaah i want side skirts now :\

 

[johnvx220]

Does look great and the 19" just set the car off .

 

[TDI PEP]

Looks awesome. I cant wait for mine and am glad I ordered the side skirts I also have opted for the rear spoiler as I have this on my current car and think it looks ok.

Just toying with whether to get the RS4 for it....

The silver does look good. Glad I got this now.

 

[Eddy Gein]

Great looking car Tristan, im thinking of getting some 5mm or 8mm spacers for the rear wheels, what size are yours? iv seen some eibach ones for a mk5 golf that would work. Did you need longer bolts?my wheels are 19"x8".

 

[jonjay]

love those BBS wheels...

 

[timbo9091]

lookin well mate.........what do you call the side skirts and where mights i get them???? cheers

 

[TristanLeon20VT]

Great looking car Tristan, im thinking of getting some 5mm or 8mm spacers for the rear wheels, what size are yours? iv seen some eibach ones for a mk5 golf that would work. Did you need longer bolts?my wheels are 19"x8".

I only have 10mm spacers at the back, due to advise of my dealer. Otherwise the wheels could hit the rear fenders, because I'm 5cm lower.

 

[TristanLeon20VT]

lookin well mate.........what do you call the side skirts and where mights i get them???? cheers

These are original Seat Sport side-skirts. Mostly they are fitted with the Seat Sport bumperkit.

 

[Eddy Gein]

im getting the eibach pro kit and koni fsds fitted next week so should be similar to your set up, so do you mean 10mm spacers on each wheels or 5mm on each wheel? so you didnt need longer bolts either?

 

[seadragon]

Mine is the standard FR kit with just the skirts as extra and it looks amazing., also the coded mirrors.

Had many guys in their Audis and Golfs looking at me jealously

 

[timbo9091]

So what your saying basically is that going to seat direct then would be my best bet to get these sideskirts?? they defo look well!!!

 

[TristanLeon20VT]

im getting the eibach pro kit and koni fsds fitted next week so should be similar to your set up, so do you mean 10mm spacers on each wheels or 5mm on each wheel? so you didnt need longer bolts either?

My experience is that the FSD's will not be as low as the Bilstein's that I have. With the FSD's you can lower by max. 3.5 cm's (by Koni's advise).

I have 10mm spacers on each wheel (only backwheels).

 

[TristanLeon20VT]

So what your saying basically is that going to seat direct then would be my best bet to get these sideskirts?? they defo look well!!!

Yes, they are original Seat-parts.

 

[TristanLeon20VT]

Last sunday we did a little photoshoot.

Click on photo's for bigger format:

 

[TristanLeon20VT]

Had my FR on the dyno last saturday:

Result: 280hp and 415Nm (JD Engineering custom remap and Full Milltek non-resonated)

Vid's on dyno:

http://www.youtube.com/watch?v=XFeutKx6-V4

http://youtube.com/watch?v=GoIq3yhPhoo

Ride by on highway (nothing special):

http://www.youtube.com/watch?v=DcaLI_Op1Yg