rear bumper cut-out

[b21playa]

Hi all

currently my exhaust is hidden, if i wa to get a cupra tdi exhaust, how *** i go about cutting the black plastic?

can i just to the LC plastic and swop it?

 

[amccan10]

get a hacksaw and chop in to it! smooth it off with some sand paper and job done!

that's what the garage did to mine when i got my exhaust fitted. looks fine.

(although i had nothing to lose as my back bumper had started to melt *** the rat that had the car before me had the exhaust moved back too close to the plastic!)

 

[b21playa]

Was hoping i could chnage the plastic for the cupra one to its no messing about

 

[phil739]

Was hoping i could chnage the plastic for the cupra one to its no messing about

if you mean the plastic bit at the bottom of the bumper that runs the full lengh of it , then it cant be changed you will need to buy a cupra rear bumper to get a neat job

 

[b21playa]

if you mean the plastic bit at the bottom of the bumper that runs the full lengh of it , then it cant be changed you will need to buy a cupra rear bumper to get a neat job

cheers mate

now i need to find a cheap rear bumper off a cupra

 

[Jonny]

The Seat Sport back box with 6" x 4" oval tail pipe for the Cupra, 20V & TDi models (part number 1M0072002) comes with the plastic trim required to finish the cut out.

Speak to your local dealer and ask if they'll sell the trim separately... it's not the large black trim like on the LCR, it's a small piece of trim that simply screws in place & covers the bit you cut out.

 

[b21playa]

anyone got a bumper for sale in silver

mine has been marked now so might as well replace with one from an early cupra with cut-out

ANYONE?

 

[phil739]

check the for sale section ....

there is one for sale , which is silver

 

[b21playa]

check the for sale section ....

there is one for sale , which is silver

I need prefacelight

 

[phil739]

ok

wasnt sure if you were wanting to get rid of the bumper strips ..

try ebay seen them on there and go for pennys , as most peeps up grade

you never know you might get a bargain

 

[b21playa]

ok

wasnt sure if you were wanting to get rid of the bumper strips ..

try ebay seen them on there and go for pennys , as most peeps up grade

you never know you might get a bargain

No problems

I initially did but then would need the front as well and it gets expensive, and skint aat the mo.

Plus given the average time i keep a car is about 6months, doesnt make it worth while

 

[b21playa]

you ment the iner-lining for the bumper. yes this can be chenged. just order one from SEAT i cut mine out but. its up to you

the bottom black plastic

 

[b21playa]

money is short.

ive no job at all which means no income

 

[b21playa]

think i will hold out yet and leave car how it is

cant afford that sort of cash