My Cordoba Coupe Trackday Car Project

[ArosaRacer]

Stu i Have a DED code box that if you need any bits feel free to rob it

 

[Mk2steve]

Hi could you run down the spec of the engine, I've had my engine back a couple of weeks now built by RPM

Full ported by Jim
resized rods
Je 12.5:1 Pistons (lightened & balanced)
Newman 288 cams
Competition bearings
Lightened Flywheel
ARP Bolts
Lightened crank
Port matched Dbilas inlet manifold
Dbilas Vernier
Dbilas Inlet Vernier
Twin 45's

Going for rolling road on Friday @ BD Engineering

Any ideas on BHP.

 

[F2 Stu]

Badger 5 DTH Throttlebodie Conversion
DTA EXP38 ECU
RPM 275 Cams
Piper Vernier Pulley & Inlet Cam Sprocket Vernier
RPM Gasflowed & Ported Head, Injector reccesses filled, mod'd combustion chambers, matched ported to TB's
ITG Megaflow 'Domed' Foam Filter
80mm trumpets
20vt Fuelrail, Injectors & 3 BAR FPR
Renualt Laguna Coilpack(?)
Ford Crank Trigger
AC pump, Rad & Pipes Removed
VW Mk3 Golf 2.0 8v Alternator & Bracket
Windage tray
Shrick Baffeld Sump
TSR 4-1 Manifold
2.5" Jetex 100 Cel Sports cat
2.5" Jetex Cordoba Cupra 20vt Exhuast

whats the size of the 16v?

 

[Mk2steve]

9A 2.0 Oh it has a Magnex four branch with Omp Gp A Two box system.

 

[RobT]

Hi could you run down the spec of the engine, I've had my engine back a couple of weeks now built by RPM

Full ported by Jim
resized rods
Je 12.5:1 Pistons (lightened & balanced)
Newman 288 cams
Competition bearings
Lightened Flywheel
ARP Bolts
Lightened crank
Port matched Dbilas inlet manifold
Dbilas Vernier
Dbilas Inlet Vernier
Twin 45's

Going for rolling road on Friday @ BD Engineering

Any ideas on BHP.

If they haven't told you what BHP you will get, I would pay them no money

 

[Mk2steve]

Hmm they said they would be disapointed at anything under 210. What do you think.

 

[RobT]

I think with the hike in CR you should get this easy - I have seen similar spec engines do 215 on 45's

what size are pistons ? (are you above 2L now)

 

[Mk2steve]

I've kept it 1998cc as i don't like to cheat in the sprint Mod Prod class.

 

[ibizacupra]

high compression is the key to the valvers pushing good figures

 

[F2 Stu]

Rob/Bill, how do you turn the volume down?

 

[m0rk]

cork under the right pedal

 

[gazjones]

dont think even that will help mork on sunday it set a mk3 cupra alarm off just blipping the throttle, sounds ace.

 

[WeeJase]

Rob/Bill, how do you turn the volume down?

i remember rob turning up somewhere with some pelter ear defenders on

 

[F2 Stu]

Normally stick a cork elsewhere, but we wont go into that......

 

[DPJ]

i remember rob turning up somewhere with some pelter ear defenders on

In the dim and distant past I've been pulled and cautioned for driving with ear defenders on.

 

[ibizacupra]

Rob/Bill, how do you turn the volume down?

its something to do with the right hand pedal... cant quite remember what tho... its like a wowwow effect pedal

http://badger-5.com/bin/greenjetta.wmv

happy days

 

[cordobabrendy]

what about removeable velcro sound deadening for road use, bonnet and bulkhead? then full on trackday ***** the rest of the time.

 

[F2 Stu]

Hmm they said they would be disapointed at anything under 210. What do you think.

I asked Max about what would mine put out, but all he wanted to do was stick his face in my groin

 

[minxycov]

I asked Max about what would mine put out, but all he wanted to do was stick his face in my groin

better than your ass though....

 

[F2 Stu]

I'll take that as a compliment shall I?