Wheel Spacers

[Chrisdaman]

i'm getting some wheels that are 5x100, and the ibizas are 4x100, i've seen some FK adaptors on Venommotorsport, but they come in various sizes, i want to stagger the wheels slightly as it looks really good, the spacers come in 25mm, 30mm and 35mm, the offset of the wheels is +23.

any suggest to me the best combination, i was thinking 25mm on the front and 30mm on the back, would 35mm be a bit extreme?

Cheers
Chris

 

[edc]

You want spacers and adaptors together?

 

[Ben16v]

By the sound of it they are combined as an all in one package.

The standard offset is 40

The rear is naturally 35mm (im sure it is) narrower on the back. The front hardly needs spacing but to have it to as near as standard offset would be best. With a 20mm spacer on the back.

With your offset i rekon 30mm on the rear and 10-15 on the front with the adaptors your getting. If the smallest you can get is 20 then thats your best bet. 20mm spacers on a et37 wheel catches slightly on the back but only with stereo and hard bumps or rear passengers.

Hope this makes sense.

 

[Chrisdaman]

the adaptors come in the thicknesses of 25, 30, and 35mm, the offset of the wheels is actually 30 (found out when i picked them up) and they are 15x8 wheels. 25 and 30mm sound like a good combo?

also are mk4 and mk5 polo coilies the same as a mk2 ibiza?

 

[Mckellar]

i ran mk4 (6n) polo coilovers on mines no bother at all

 

[Chrisdaman]

quality, means i can get them cheaper

cheers for clearing that up