VCDS / VAG-COM Register - Who's got what and where?

[AndyEvs198]

HELP Need VagCom hook up

Getting a bit desperate now.... ANYONE ANYWHERE near Weston super Mare / Bristol?

Wifes Leon is being a pain (EML illuminated) and the MOT is due in 4 weeks!

Any pointers in the right direction would be much appreciated!

Cheers
Andy

 

[donovan2123]

I have VCDS full version and can do pretty much anything VCDS allows including changes to new mk3 leon and ibiza etc. I am based in Oxfordshire.

 

[MrStroppy]

Anyone doing Vcd's in PE10 area?

 

[kevster184]

Hi Matt

I'm in Norwich
Ta
Matt

I now own vag com, For anyone who needs a hand, im usually in the Northampton / Milton Keynes area PM me if you need a hand

Full vcds - Clacton/Colchester

Clacton evenings and weekends, Colchester daytime (work)

Don't work at Colchester SEAT by any chance?

Looking for someone in the Cambridgeshire area, pick my car up saturday from colchester. Dealer can't do all the settings I'm after

 

[Bob_D]

@ NickJones1 - Do you still have VAG Com Nick ? I'm in Southampton and need to reset the airbag light I tripped when I removed the glovebox and pass air bag switch!!

 

[Muddybum]

Anyone working in the North East of England, Redcar to be specific?

I have a towbar that will be needing coding in soon and perhaps some other bells and whistles I may want to tweak.

Cheers
Simon

 

[poandre]

Anyone doing Vcd's in PE10 area?

Hi
I have PE1

 

[JoshRedCupra]

Anyone in the Essex area available over the weekend? I'd like to change the electronic KPH into MPH and also chirping when locking. Heard VAG-COM can do this? If this isnt true please let me know

 

[DanSummerfield]

Anyone got VAG Com in derby/notts area?

 

[RyanR]

VCDS (VAG-COM)

Fully Registered HEX-CAN-USB

Birmingham, Midlands

PM if needed

I can't PM yet but my battery has died and I think my ECU may have reset from the stage 1 I remap I had and would like to get it checked but can't afford my own vagcom at this point in time

 

[Badger]

I can't PM yet but my battery has died and I think my ECU may have reset from the stage 1 I remap I had and would like to get it checked but can't afford my own vagcom at this point in time

The map on the ECU can't reset or disappear unless you have multiple maps and its reverted back to the original?

 

[RyanR]

The map on the ECU can't reset or disappear unless you have multiple maps and its reverted back to the original?

Well I got it from my local stealers and when I took it for a stage 1 the guy said it had already been mapped but he thought the turbo was running beyond its capability so stuck his stage 1 map on it, so I have no clue if he wiped the other maps off and just left his or whether they're all still on there, ideally I'll buy my own in due course

 

[grahamtabby]

comfort module

Fully registered HEX-CAN-USB VCDS All cars 1992 to present.

Able to do the following:

ECU Logging
Enable/disabled functions such as locking chirps, Long coded functions on >2005 models
Adaptions
Fault code reading
Service resets

Location HOVE East Sussex.

Pm me for assistance.

Hi paul.
I have an audi tt roadster, just bought a comfort control module to get the roof/boot/fuel caprelease and central locking to work but it needs programing to my car. are you able to do this if i bring it to you? thanks
I am a newbie so cannot pm
graham

 

[grahamtabby]

Hi Guys
I have a 2001 Audi TT roadster with a roof that doesn't work, also central locking, fuel cap and boot release do not work, all controlled by the comfort control module. i have bought a comfort control module off ebay and my 2 local indies ar eunable to program it for a couple of weeks. Watlington garage said there are a few guys on here that may be able to help as the cupra uses the same vag com system as audi/vw. i cannot pm as i am a newbie, i am in EAST SUSSEX.
I am away for a week from sunday 21st june and would like to know before i go if the modulei bought off ebay is good.
many thanks
graham

 

[jedgar]

Hi mate,
Do you still do stuff with the VAG-COM.
Cheers
Jonny

 

[MJ]

PEOPLE - THIS IS NOT A HELP REQUEST OR GENERAL CHAT THREAD.

If you want vcds help then post in the vcds help request section and stop clogging this thread up with junk posts.

 

[obou]

Have Vagcom in the Yeovil area if anyone needs anything. Just PM me or post in here. Some weekends I will be in the Thetford area.

 

[MJ]

I now also offer comfort window closing activation for mk1 Leons, toledos and anything else based on the mk4 golf platform.

This allows the windows to be opened or closed via the key fob.

 

[olie93]

Hi All,

Im based in Deal near dover and i have HEX-USB+CAN Full version

 

[andyhope]

HEX-CAN USB, Full version.

No laptop access except when I pinch one off brother, so you'd need to supply your own

Based in Durham (DH6) - close to Peterlee, Seaham, Hartlepool, etc