lukas
Guest
I recently bought a 51plate ibiza cupra R with 60k on the clock and a SEAT INCA 1.9SDI van i have used ibiza as a donor vehicle to build my SEAT INCA/IBIZA R....
so far in the last few weeks i have swaped the following from the cupra R onto the van
-complete subframe inc steering rack wishbones ARB and brembo brakes
-engine and gearbox
-abs
-gear linkage
-front panel wings bumper and bonet
-complete wiring loom and ecu
-steering coloum pedal box air con and heater box etc
-dashboard
-fuel lines and sender unit using original van tank
i still have to fit the downpipe and exhaust and carry out a rear disc conversion and few other bits and bobs... seats etc
just interested to see if this has been done before as its been very easy and makes for summin a bit diferent!
so far in the last few weeks i have swaped the following from the cupra R onto the van
-complete subframe inc steering rack wishbones ARB and brembo brakes
-engine and gearbox
-abs
-gear linkage
-front panel wings bumper and bonet
-complete wiring loom and ecu
-steering coloum pedal box air con and heater box etc
-dashboard
-fuel lines and sender unit using original van tank
i still have to fit the downpipe and exhaust and carry out a rear disc conversion and few other bits and bobs... seats etc
just interested to see if this has been done before as its been very easy and makes for summin a bit diferent!
Last edited by a moderator: