OBDEleven Formentor - See below for working ones

[cairus]

I have direct access to someone who has OBD 11 with a lifetime license, just like me. He got a new car, a Skoda Octavia Combi facelift, produced in February. He was able to scan the vehicle normally with the VAG app. Only the error log of the SFD 2-protected control units was partially without plain text.

 

[tracktoy]

I would stress I am an OBD11 Fan and I hope they (I suspect its VAG rather than OBD11) get it fixed but saw this today.

 

[cairus]

I would stress I am an OBD11 Fan and I hope they (I suspect its VAG rather than OBD11) get it fixed but saw this today.

View attachment 47409

I suspect it only affects the SFD protected control units and mit the SFD 2 Units

 

[Tell]

I would stress I am an OBD11 Fan and I hope they (I suspect its VAG rather than OBD11) get it fixed but saw this today.

View attachment 47409

The latter I guess are what the crowd sourcing disciples are seeing. The guys that write apps by paying extra to do that, that may not get properly tested on the specific car and lead to problems... are locked out of development at the minute. That's my reading of that. Well any sensible person should code it rather one click. So they have been parked until SFD2 is sorted on Obdeleven. Obviously business as usual on all models till 2024 with SFD2 on it.

 

[tracktoy]

I agree you should do your research and code manually but what supprised me this morning was this on the OBD Site

Based on what I see on the OBD11 Forum I dont think you can call OCA RISK-FREE

 

[cairus]

Marketing is everything

 

[tommyfulf]

Is there a way of turning off the eco assist? I turned the tips off but I'm wanting to turn off the annoying foot off before a roundabout etc

 

[the_winner]

Is there a way of turning off the eco assist? I turned the tips off but I'm wanting to turn off the annoying foot off before a roundabout etc

It is somewhere in the settings I have disabled it from the settings but I don’t remember where !

 

[tommyfulf]

I'll have another Google and look through the manual but the only setting I found you can disable is the eco tips which is not the foot off coming up to the roundabout that's apparently eco assist and I can't find a setting anywhere

 

[the_winner]

I'll have another Google and look through the manual but the only setting I found you can disable is the eco tips which is not the foot off coming up to the roundabout that's apparently eco assist and I can't find a setting anywhere

I am sure that the messages for roundabout , traffic in front etc is from when you use the maps , check the maps settings

 

[the_winner]

I am 90% before i complete the Trailer Assist for Formentor MY2022 , i only need SFD for the 5F Infotainment to enable the Trailer Assist to show it at the infotainment . I will do it and i will post the results

 

[tommyfulf]

I've managed to code things in A5.
SFD auto unlock is activated.
When trying to change settings in Module 13 like turn on cruise control function on my Formentor I constantly get "something went wrong" any ideas or work around.
I've tried bonnet open, ignition on, door open
Bonnet open, ignition on, door closed
Bonnet open, engine on, door open
Bonnet open, engine on, door closed
And all the above with the Bonnet closed.

 

[Mares]

I have the same issue with module 13...did you try contact OBD11 forum?

 

[Tell]

Report back with the answer.

 

[tommyfulf]

Ive logged the question. Euth their contact us support function, haven't heard anything yet.
I'll also do the obd11 forum though

 

[Koentjeeeee]

I've managed to code things in A5.
SFD auto unlock is activated.
When trying to change settings in Module 13 like turn on cruise control function on my Formentor I constantly get "something went wrong" any ideas or work around.
I've tried bonnet open, ignition on, door open
Bonnet open, ignition on, door closed
Bonnet open, engine on, door open
Bonnet open, engine on, door closed
And all the above with the Bonnet closed.

Did you plug in the charger cable? that was what did the trick for me. Bonnet open, charger in, ignition on.

 

[tommyfulf]

Did you plug in the charger cable? that was what did the trick for me. Bonnet open, charger in, ignition on.

Thanks for the reply mines not hybrid though.
1.5tsi
Very very random and the support feature on OBDeleven haven't responded to my 2 emails