Motorway lights

Slickric21

Active Member
Feb 23, 2019
554
254
Norfolk
Cheers @Tell

I did come across a Dutch discussion on this and it seems you can’t change it from 140km/h


Wonder why Seat changed it from 110km/h to 140km/h….. 🤷🏻‍♂️.

Just found another Spanish forum confirming you can’t change it

This thread implies you can change it, but need to switch to a “developer session” somehow first ?
 
Last edited:

Slickric21

Active Member
Feb 23, 2019
554
254
Norfolk
I’ll have a play later and see if I can find this Developer Mode for the control module 09.

Update:

Managed to change it !!
You do indeed need to enable ‘Developer mode’ for the module that is under the ‘Change service’ tab.

I tried to set 75km/h on and 20s delay off…

But these were the lowest values it showed after saving.
Tried again and it did the same

100km/h on
50s delay off

Will have a drive later and see if I notice anything
 

Attachments

  • 68C73251-0FE9-4814-B011-EB5455C99B88.png
    68C73251-0FE9-4814-B011-EB5455C99B88.png
    30.1 KB · Views: 77
Last edited:
  • Like
Reactions: Tell

Slickric21

Active Member
Feb 23, 2019
554
254
Norfolk
Ok so just been out to test this, and I can confirm I noticed NOTHING 😂

I’ve got a long stretch of quiet, straight, flat, unlit sDual Carriageway near me.
Got on it, set Cruise control to 70mph (so way past the 100km/h I’ve set for this)
Counted eagerly for the 10secs delay to elapsed and looked carefully at the beam…..
Nothing.
😂

My guess it’s that this setting will in fact turn just turn on the headlights during the day if the specified speed/duration are met.
It fact that makes sense if you think about the default setting of 120s delay to turn off.
If the lights did angle up 5% or degrees on the motorway, you’d want them to angle back down a lot quicker than 120s if you left the motorway.

Makes me wonder if there is an elusive setting buried somewhere for these 110km/h “Motorway lights” that we don’t know about or nobody has found.