MAF plug

[CUPRACAR]

Can anyone tell me the correct way to remove the plug on the MAF?

I’ve pressed down on the small plastic pip inside the rectangular slot and pulled almost to the point of breaking the plug.

WTF am I doing wrong.

 

[RickC]

from the top put a small screwdriver in the square hole , then lever up the clip whilst pulling the plug off

 

[CUPRACAR]

Done it thanks mate I am a prat at times

 

[PlatinumR]

was just about to say because those connections are environmentally sealed I find if you give it a squeeze together before pulling they pop straight off.
Seeing as you've done it i'll wind me neck in