Leon Cupra R AWD PPT5935R E85 build

Gulfstream

Active Member
Jul 31, 2010
507
6
I'm surprised you didn't have the tc mapped out I hate mine , would love to run no maf , this will be an animal once run in ,

You're last comment made me think so I just went for a drive. In fact when I turn off the TCS it's really OFF OFF. No interference. Can go sideways in the snow all day long.

Me likin Eurodyne more and more every moment :p

Better be careful next trackday.....
 

Gulfstream

Active Member
Jul 31, 2010
507
6
Nice bet that's fun to drive , so does it turn off the ESP as well ,

Yes, turning off TCS now removes TCS and ESP completely. Before this map when I turned TCS off ESP was only partly off. Still interfering.

ABS remains active in any case.
 

Gulfstream

Active Member
Jul 31, 2010
507
6
the VERY first start after engine swap and turbokit install. Still on old BAM remap:


How it idles now with Eurodyne MAF less tune and GT3071R turbokit:
 

Gulfstream

Active Member
Jul 31, 2010
507
6
Tuned it up to 21psi today. Stock clutch is slipping a bit, waiting for a Clutchmaster FX400 and Wavetrac LSD.

My LCR MAF maxes out around 6400rpms at 329g/s. My redline is 7500rpms. 20psi by 3200rpms. No knock at 21psi. Looking for 30psi after new clutch and LSD. Happy new year :p

Here a graph and some logs:
032030.jpg

pptpsi.jpg

pptmaf.jpg
 

Gulfstream

Active Member
Jul 31, 2010
507
6
399WHP = 454BHP with 451NM on the dyno today at 25psi knock under 0.75. No knock over 58000rpms.

6.jpg


Will tune the map a little more and take it up to 30psi when I have new clutch and LSD in couple weeks.

the boost on the dyno came in late bcs of how its built. Here is how it spools on the road:

boost3.jpg


20psi by 3300rpms in 4th gear on a straight and level road. I think thats alright.
 
Last edited:

Gulfstream

Active Member
Jul 31, 2010
507
6
yea it goes like nuts! Just looking fwd to summertime so I can take the dubbed tires off :p

I think 480bhp is possible with some tweaking and 30+ psi
 

Gulfstream

Active Member
Jul 31, 2010
507
6
New dyno today to confirm the last numbers. Had to do the run in 6th gear as his rolls where too light for 4th gear. 413whp and 459wnm at 27psi. Thats 469bhp and 576NM :D

17c rise in IAT today so defo need a larger FMIC.

180605_162987077082501_136791243035418_311650_2723171_n.jpg