Willy has a different engine is my only guess and my 2 hybrids had different spec, because as its seems every turbo to come out of the CR workshop doors seems to vary.
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
Willy has a different engine is my only guess and my 2 hybrids had different spec, because as its seems every turbo to come out of the CR workshop doors seems to vary.
Rob - dont give up on it yet mate. Are CR Turbo's no willing to do any more development work on it? I understand its costing you money so it may not be an option to send it back but surely CR turbo's are willing to assist with this?
If they are not then are there other companies that are willing to work with you on this? AET Turbos, Turbo Technics...?
If they are not then are there other companies that are willing to work with you on this? AET Turbos, Turbo Technics...?
Yeah its about money now and the lack of, everytime the turbo comes off its €400+ i am thinking about sending the V1 hybrid to TD for analysis/modification.
So why isn't yours making the power ? You have every mod to make it happen how are some getting it and others don't , is it your mapper ?
The tuning company is charging you 400 smackers every single time? Thats a bit off to be honest as surely its in their benifit to help you with this?
its the Turbo, end of, the mapping is spot on.
Nope he has a S3
No everytime the turbo has to come off it cost £400+
S3 has the same engine be it the amk 210 bhp like mine or the bam 225 there the same engine , , ouch to 400 quid every time
Well thats a effing con then surely? Can you not do it yourself?
Not even my car and I am angry about it lol.
If I had a ramp I would do it myself, the turbo on the transverse 1.8t is a proper cnut to get at.
its far worse on a 4wd car!
clipped V1?
CR should accomodate this I would have hoped foc..
clipped V1?
CR should accomodate this I would have hoped foc..
Last edited:
brad1
Guest
I think Robdon got some ramp style rampy things...they looks pretty good and he managed to most of his work on them. Cant remember what page he posted it on so might be worth asking him.
Robbie, the k04 removal and refit on the lcr is a pain but quite doable. i did mine years ago over the course of a week end an hour or two at a time. Axle stands and jack was all the access equipment needed. I recon 4-5 hours it would take me second time around.
Very satisfying but not to be underestimated as there will always be the one nut that refuses to move or that one tool that your missing. Start it friday night and by sunday afternoon you'll be back on the road without overdoing it. Just give yourself plenty of time .
Very satisfying but not to be underestimated as there will always be the one nut that refuses to move or that one tool that your missing. Start it friday night and by sunday afternoon you'll be back on the road without overdoing it. Just give yourself plenty of time .
Personally i don't think you have much to loose so give it a go. Clearance, clip or both, what is the magic formula i wonder.
The £400 you would have spent on getting someone else to do it could be spent on hiring a garage with a ramp for a weekend and buying all the tooling you needRobbie, the k04 removal and refit on the lcr is a pain but quite doable. i did mine years ago over the course of a week end an hour or two at a time. Axle stands and jack was all the access equipment needed. I recon 4-5 hours it would take me second time around.
Very satisfying but not to be underestimated as there will always be the one nut that refuses to move or that one tool that your missing. Start it friday night and by sunday afternoon you'll be back on the road without overdoing it. Just give yourself plenty of time .
Ordering up the forge Big race kit, i noticed my old FMIC was losing pressure across the core and i am wondering if there is a bottleneck there, i guess i will soon see when i get the forge kit, should be here next week Can't wait.
Can't wait.
I noticed your thread on this, with regards to the inlet/outlets being a bottle neck. Will be good to see how it differs if any with the new kit. Even if it doesn't it's extra wh0ring points for getting the Forge
Similar threads
