Few questions Regarding Injectors and Mbc ect

[DaNnY_LaD]

Right Ive got all my bits fitted on the cupra nealy

But left to do is

A: Fitting Injectors is this easy and does anyone have a guide or pics of how todo it...

B: I have a idea how to fit my turbosmart mbc but when it comes to tuning it do i slightly adjust it so on my boost gauge on WOT it Peaks at 1.45bar then holds at what ever? As this what Boost Most gt2x lads run..

Then log everything If so what logs should i do..

Thanks

 

[DaNnY_LaD]

Just Doing some searching regarding the mbc 1.5bar is 22psi do i just turn it till hits 22psi peak ?

 

[DaNnY_LaD]

anyone?

 

[DaNnY_LaD]

anyone

 

[Reuvers]

changing the injectors is easy.
You'll have to remove fuel rail and bolts on top of manni. then you can pull the injectors out one by one (or all together as they are attached to the rail).
Then there are small metal clips on the top of the injectors that you easily undo and the injector releases

as for boost I do not know the answer sorry

 

[Damoegan]

I'd give Bill a PM mate as he can tell you all you need to know.