DSG: Paddles dont react

[mykro]

Sometimes it happens that paddles under steering wheel dont react on order to increasing or decreasing engaged gear. Nothing happen. I need to press down gearbox lever in order to swich to S mode (from D), and back to D and then it become functional. What kind of problem is it ? Lets say it is once per 500km.

6 dsg ds250, 4x4 leon 2015

 

[mykro]

sometimes i had a bunch of errors, wtf?
13 Faults Found:

21153 - Gear 1
P072C 00 [002] - Not Selectable
Intermittent - Not Confirmed - Tested Since Memory Clear

21154 - Gear 2
P072D 00 [002] - Not Selectable
Intermittent - Not Confirmed - Tested Since Memory Clear

21155 - Gear 3
P072E 00 [002] - Not Selectable
Intermittent - Not Confirmed - Tested Since Memory Clear

21156 - Gear 4
P072F 00 [002] - Not Selectable
Intermittent - Not Confirmed - Tested Since Memory Clear

21157 - Gear 5
P073A 00 [002] - Not Selectable
Intermittent - Not Confirmed - Tested Since Memory Clear

21158 - Gear 6
P073B 00 [002] - Not Selectable
Intermittent - Not Confirmed - Tested Since Memory Clear

21159 - Gear R
P072B 00 [002] - Not Selectable
Intermittent - Not Confirmed - Tested Since Memory Clear

10731 - Valve 3 in Transmission Part 1
P174A 00 [002] - Electrical malfunction
Intermittent - Not Confirmed - Tested Since Memory Clear

10732 - Valve 3 in Transmission Part 2
P174E 00 [002] - Electrical malfunction
Intermittent - Not Confirmed - Tested Since Memory Clear

10657 - RPM Signal from ECU
P0726 00 [002] - Implausible Signal
Intermittent - Not Confirmed - Tested Since Memory Clear

10739 - Valve 3 in Transmission Part 1
P174A 00 [002] - Electrical malfunction
Intermittent - Not Confirmed - Tested Since Memory Clear

10909 - Cooling Oil Valve
P179D 00 [002] - Electrical Malfunction
Intermittent - Not Confirmed - Tested Since Memory Clear

10906 - Cooling Oil Valve
P179D 00 [002] - Electrical Malfunction
Intermittent - Not Confirmed - Tested Since Memory Clear

I saw on the internet that these error appears when scanning for error when engine is running.... so hopefully this is problem of scanner

 

[Tell]

Normally you scan when the engine is running...

Pass on the paddles but grabbing the lever and toggling it to S and D fixes the gear selection if your fingers hit the paddle lever on a roundabout and you get stuck in gear. Happens sometimes so the quick fix to restore is the -> S -> D or swap D to S which ever you were in before sorts it out.