ChrisCurzon's AM04 Ibiza Cupra

[ChrisCurzon]

where did you get the braided fuel lines from and what size did you get?

Hose solutions mate, ID for the line 8mm and the finishers were -6

 

[cupra-neil]

are they simple to fit?

 

[ChrisCurzon]

Yeh mate easy just a bit of a push getting the ends on

 

[cupra-neil]

quite a cheap mod looks better aswell, is this what i need want to be sure when i order cause it says 8/10mm

http://hosesolutions.org.uk/index.php?main_page=product_info&cPath=18&products_id=1247

http://hosesolutions.org.uk/index.php?main_page=product_info&cPath=18&products_id=1055

 

[M87NER]

(Please specify on purchase which you require, measurement is ID.)

so somewhere during the order process you have to mention you want 8mm ID,

and dont forget the alloy hose finishers in -6

 

[jamiebennett81]

(Please specify on purchase which you require, measurement is ID.)

so somewhere during the order process you have to mention you want 8mm ID,

and dont forget the alloy hose finishers in -6

is the 8mm ID the same for the Leon fuel line as well?

 

[ChrisCurzon]

(Please specify on purchase which you require, measurement is ID.)

so somewhere during the order process you have to mention you want 8mm ID,

and dont forget the alloy hose finishers in -6

Yeh theres a comments box on the payment page so just say what sizes and colours you want in there

 

[arron2004]

looking awsome loving the yellow brembos

 

[cupra-neil]

Yeh theres a comments box on the payment page so just say what sizes and colours you want in there

was woundering how to do it thanks, also are they easy to trim to size?

 

[David_smith_909]

lovely example Chris

where did you get your coolant bottle?

Jamie - Its a Bailey Header tank, available from any bailey supplier etc etc, fits oe hoses too, glad chris cleaned it, it was a mess when i gave it him

Chris - Fit your ic pipe properly, it shouldnt sit up that high near the strut, look at pics as it was on mine, looks much better

Good work fair play

 

[ChrisCurzon]

Won't go down any further mate, i tried when you mentioned it but thats as far down as it goes and when it was at ADS they had the pipework off and got it back exactly the same, must be something to do with the manifold, as its the only difference!

 

[ChrisCurzon]

was woundering how to do it thanks, also are they easy to trim to size?

I used an angle grinder mate, was the simplest and quickest way to get a neat cut

 

[cupra-neil]

titanium hack saw blade will have to do

 

[cupra-neil]

Do you get any fuel coming out when you change the lnes over, want to know what to expect when i do them?

 

[ChrisCurzon]

Yea mate theres a bit that comes out of them just have a rag ready to put over the end to soak it up. Just undo the fuel cap before you start to release any pressure, so that at least it drips out rather than shoots out lol

 

[warren_cox]

Really nice job Chris, and very tastefully done.

 

[ChrisCurzon]

Really nice job Chris, and very tastefully done.

Cheers mate

 

[cupra-neil]

Yea mate theres a bit that comes out of them just have a rag ready to put over the end to soak it up. Just undo the fuel cap before you start to release any pressure, so that at least it drips out rather than shoots out

thanks chris for the help

 

[ChrisCurzon]

No probs mate

 

[ChrisCurzon]

Since i changed the turbo and went to an LCR tip the filters been right at the top so decided to buy a cold air feed, found a nice big 3" one, so it keeping everything cool now

Also decided to get a new filter, as mine was way too small and had seen better days, so my new Jetex one arrived today and its massive to say the least, just about fits lol
But it does sound like it wants to suck you into the engine bay lol, maf readings improved with it too!

My gf's also bought me these for my birthday so i need to get round to fitting them soon, so can have some shorter gears!

Got a couple more things to do this weekend and then i gotta get some logs done, so i'll update it again once all thats done!