Black Ibiza Mk3 Cupra

[burnsey]

Thanks Big eck, yeh I was planning on getting them soon. I didn't know whether to get the 15mm or the 20 mm though, 20mm are quite expensive the one's I have looked at anyway, do you know if halfords ones are any good anyone?

Cheers

 

[burnsey]

Hey can anyone tell me if these are any good,they seem a bit cheap to me.

http://cgi.ebay.co.uk/SEAT-IBIZA-CU...301|66:2|65:12|39:1|240:1318#ebayphotohosting

Cheers

 

[big eck]

Ask the lad that ownes this mate

http://www.seatcupra.net/forums/showthread.php?t=201166

Its his car thats in the pic on that site with that very intercooler fitted

As for the spacers mate here you go

http://www.seatcupra.net/forums/showthread.php?t=136418&highlight=spacers

I fitted them on my old ibiza cupra and never had one bit of bother with them, very cheap as well

 

[Reuvers]

As said above, both those parts are good.
The fmic kit is used by quite a lot of people on here and logs were supposively good on them too.

the exhaust is quite easy to do, but you're best off doing part by part if you're on your own as the exhaust will be quite heavy to hold in place and get the bolts in at the same time.

I did mine on the driveway too...

 

[burnsey]

Hey bad day today lol went to the garage again and was shut! so I tried another garage,got 2 knew tyres and asked for tracking,but the tracking bolts were so tight they couldn't adjust them,they said I gotta get them heated up and loose :s

Also found another little oil leak running down on the rear right side of the sump looking at it from the front

exhaust I hope ,should be here tomorrow and I orderd that front ebay intercooler

 

[burnsey]

Cheers guys,will take on you advice and do it part by part Reuvers and will be ordering the spacers end of the month gonna leave my bank account have a break

Cheers

 

[adp]

The ebay intercooler silver cupra is mr d's, hes a cardiff boy give him a shout. He can also sort you out with a custom exhaust and downpipe!

 

[goodylookinleon]

What apnin burnsey,

Looks like u gonna be using my drive way more then lol.

U wanna pop down my old man got the heat gun in the van to loosen the bolt.... u know if anyone can do it he can.

Be awesome to put that zorst on.. be interesting to see what it sounds like..

see u later most probz

 

[burnsey]

Alrite mate

Aye I was gonna ask can I use the driveway to chuck my front mount on maybe a couple of days lol

Yeh can't wait for the zorst now gonna be 2 weeks wait though cus they aint in stock,front mount should be here soon though.

Have to have another go at your leon then,see for any improvements

 

[burnsey]

UPDATE


Been busy in work so not much time to work on the car.

Turbo gauge installed'car is pushing around 8 psi,so I don't think it is maped to 180 like I thought

Intercooler came last nigtht so can't wait to fit it on Saturday.

And ive just been ripping the back interior out and started to put the battery in the boot well,other than that its tooo cold to do anythin!!! lol

 

[burnsey]

Anyone tell me if this is the rite K03S to buy,

http://cgi.ebay.com/ebaymotors/K03S...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories

Cheers

 

[burnsey]

Intercooler Pics:

Look to the right side and its bent up a litle I ******* droped it!!!!!!!!!!

Cant get bumper on at the moment,Need to cut **** loads off my bumper mounted it to far forward,dunno wether to move the intercooler back or cut the middle section through,gonna decide by next weekend.

Also jack sliped when jacking up and split my side skirt not happy lmao :O

Bad luck

 

[Matt S!]

Looks a gud job so far...

You mite get away with just trimming/shaving behind the bumper

Shame about the side skirt !

 

[burnsey]

Few more intercooler and update pics:

Get some better pics when we get some decent weather lol

Exhaust came few days ago gonna fit it on Saturday

turbo gauge, also ordering oil pressure gauge to fit beside it in Cupra R centre console.

 

[burnsey]

This weekend if nice weather:

Fitting exhaust

Adjusting front mount as its a bit slanted.

finishing battery in boot well and hopefully fitting a cold air feed.

draining oil so I can fit my new sump plug.

gonna try and locate my second oil leek,hopefully just a new gasket needed.

And get a price from Long Life for a 3" downpipe and de-cat pipe

 

[burnsey]

Cheers Matt

I had to cut quite a bit off in the end lol and was so pissed off about the side skirt can hardly notice it luckily,glued back together

 

[burnsey]

Also started rear speaker mounts,low priority at the moment though:

 

[Danjw]

Good work there mate, coming along nicely now!!
Intercooler looks tidy, are you gonna fit the honeycombe grill over it or isnt there anyroom?
Gis a buzz tomorrow if you want, an il pop dwn. D

 

[burnsey]

Cheers mate, I would love to have the grill back on,don't think it will fit though thats another thing il have to look at lol aye will do,if the weathers good,il be taking it over my mates house tomorrow in maesycwmmer hes got a huge jack and some wicked tools to help fitting exhaust, il give you a text.

Laterz

 

[gussie53]

nice lookin car mate subtle mods look best very smart did u notice a difference in perforrmsnce wit exhaust