Hmm , Ill upload some pics of what im looking at
think you should just go and blow £500 on a fmic lol get it for sunday il fit it lol
If i had 500 quid too blow it would go there , only got about 100 left!
-
Welcome to our new sponsor Lecatona, a brand dedicated to enhancing performance for VAG group sports cars, including SEAT, Audi, Volkswagen and Škoda. Specializing in High Pressure Fuel Pump (HPFP) upgrades.
Alex's - Candy White Mk4 Ibiza - SOLDD!!! :(
- Thread starter Alex 17
- Start date
If i had 500 quid too blow it would go there , only got about 100 left!
Ok so heres what im looking at..
They also sent me theys with the bumper , Not quite sure where they go yet?
They also sent me theys with the bumper , Not quite sure where they go yet?
them clips go where the holes are in the bumper looks like you need three looking at the bumper.
one clip goes to the left two to to the right one just by the big hole and the other slightly more to the right if that makes sence.
one clip goes to the left two to to the right one just by the big hole and the other slightly more to the right if that makes sence.
yeah thats right although the hole above your right red circle looks like it needs a clip too,there to give the screws somthing to fix too.
it looks like you need six clips.
it looks like you need six clips.
Hmm thats not good i only got sent 2.. What alot of use that it!
You need 3 each side. 2 to hold the foglight and 1 to hold the grille cover. The flat metal bits slip over the plastic and the hole in them acts as a thread for the screws.
Cupra bumper looks great btw
Right thanks for the help mate, ill get on the phone too seres asap since they sent me 2 and not 6!
Hmm can i? Hopefully dad has some laying about.. Loads of things stopping me building the car back up lol , sucks!
Back too fitting this bumper
Back too fitting this bumper
Last edited:
Ill probably have some by then but if not ill let you know , Ill get my dad too have a look for some tomorrow
Just outside in the garage putting the screws in now , is there extra ones on the cupra? Like on the fr there was one each side behind fogs , cant see that on the cupra one?
Edit : Problem : Screws i took out of old bumpers skirts and undertray are too small for the holes on the new bumper... Grr BnQ Rampage needed...
Edit : Problem : Screws i took out of old bumpers skirts and undertray are too small for the holes on the new bumper... Grr BnQ Rampage needed...
Last edited:
re smaller number plate be careful as they have to be a certain size to be legal. Looks good hurry up lol! Awh wish you lot were round here and could fit stuff fro me I break things when I fit them lol!
Never saw this earlier - But those clips go where I've circled above. It's for the screw that holds the fog-light cover in place (one each side) well it did when I got my bumper anyway.
The clips for your fogs should prob come from your old bumper. I take it you've got the pre-facelift fogs to match?
Old bumer had no clips , just screws and then pushed into place.. Ill hit B n Q up tomorrow and get my new spoiler at the same time
Never saw this earlier - But those clips go where I've circled above. It's for the screw that holds the fog-light cover in place (one each side) well it did when I got my bumper anyway.
The clips for your fogs should prob come from your old bumper. I take it you've got the pre-facelift fogs to match?
, I take it i do need 3 each side and not just 1?Ahh i ran without my plate on at all so atleast this looks a tad better
Its going too be illegal either way lolIm going as fast as i can ! If all goes well the car will be done tomorrow night but it will be too dark for photos ;( Fitting stuff is easy , I've done everything with a hand and a cast hand
Granted the cast a bit oilied / cut / dirty etc very nice alex! that bumper really suits the car
Ta bud
Should look good when its finished anyway haha! Everything wants too go wrong for me atm! White frupra = win
Old bumer had no clips , just screws and then pushed into place.. Ill hit B n Q up tomorrow and get my new spoiler at the same time
Ahh i ran without my plate on at all so atleast this looks a tad better
Im going as fast as i can ! If all goes well the car will be done tomorrow night but it will be too dark for photos ;( Fitting stuff is easy , I've done everything with a hand and a cast hand
Ta bud
you'll get it sorted soon dont worry
Similar threads
