results

I was invited to go to an s2 rolling road day so i thought i would get my cupra on there, my car made 189 bhp and 250 lb ft of torque at 20 psi. i had 3 runs and it made the same power dead on twice, just wondered if this sounded right for my spec, it has revo stage 1 de cat, green cotton...

Finaly got my car remaped on monday at northampton motorsport, had a few problems with loading the map but in the end they managed to sort it, also had a few problems with intercooler hoses [:@]. It ran 185bhp at wheels which i belive is 216bhp at fly? with 260lbft torque which i was happy...

Got Very Bad rr results only got 230bhp car was running perfectly air to fuel wise have no idea why it was so bad a standard mapped lcr got 240bhp on tthe run before my mods are Seat Cupra R 225 APR Stage 2 Remap + 4 Programs (standard 225 ,95Ron,99ron,Valet) +Throttle Body...

hi guys as some of you no ive changed my mined to go hybrid just geting all my parts together and then sending my spare turbo off what i had off tommycupra for the treatment lol just wanted to no what power people where geting of these kind of turbos any graphs or information would be helpfull...

well here are my RR results, as you can see, its lagging behind a bit. Mods are Forge 007p with relocation kit, Green Dynatwist air filter (ran with heatshield on) and a custom catback exhaust, MAF was dying so I was kindly lent another one (ta Damien) One thing I've noticed is...

in case any body has not read any of my threads on my car its a 03 lcr with a missfiring problem / juddering . big thanks to andy for scanning my car . what i need to get is can someone who knows what there looking at see anything wrong with the scans etc.

OKay, I have: *00283- Front Left ABS wheel speed sensor (G47), 012- Electrical Fault in circuit *00792- A/C Pressure Switch (F129), 35-00 - - Anyone able to assist? I believe the top one would be sorted by fitting a new ABS sensor, is this correct...

Hey guys another post for today as about 2 months ago i done an experiment which many said would show a small gain. My remapped fr tdi, was remapped by angel tuning, advertised at 180+. I went onto by green panel filter and a pd160 air intake. I went to hillington rolling road, where they have a...

had my mk1 leon cupra 180 vag commed today as its running terribly, and shown the following codes. did a few searches but im not very mechanically minded so can someone put them into Lehman's terms so i can go to a garage and say i want this this and this. thanks!! 16804 17705 16514 17524...

Hi all Seat Ibiza Cupra 2001 X reg 1.8 20v T mk3 Have now finished removing my SAI and have a resistor in the N112 plug, no fault codes at all now Thought I'd do some logs to see how things are. Outside temp was 18 degrees, runs done in 3rd and 4th gear, mostly 3rd! Car was...

Hey folks, Last Saturday I had a Seat sport suspension kit fitted (and aligned on the Monday). Only real chance of a good drive was last night, and it has made a MASSIVE difference! Transformed the car's handling completely, it seemed to really grip the corners a lot tighter and the...

This is the results from Vagcom can anyone help with the results, my be a silly question just want confirmation VAG-COM Version: Release 409.1-US Chassis Type: 1M - Seat Leon Scan: 01,02,03,08,15,17,19,22,35,46,56...

Hey folks, Took the car to the local tyre place who have a Hunter 4 wheel laser alignment, as I had the Seat sport suspension kit fitted on Saturday by a friend, so the alignment/camber was way out. Here are the results; Before; After; Now, the guy said they couldn't get...

Hi all, I recently sold my standard ish Silver Mk3 Cupra to buy an already modified one. Spec: KO3s Turbo Custom Code Phase 2 Laguna FMIC Forge Tip 3" THS downpipe Decat Custom catback 4 bar FPR Jetex cone filter AMD recirc DV SAI removed N249 & N112 bypassed/removed 17" RS4...

Hi Guys, Thanks for all those that gave advice on the remap! Finally Bluefin’ed the Cupra and got a Pipercross panel filter installed. Had a rolling road last night and was pleasantly surprised with the results: Power at Flywheel 312.1 Bhp at 6439rpm Power at Wheels 266.5Bhp Maximum...

SUN POWER DIAGNOSTIC Vehicle type : Seat Leon TDI 150 Engine type : Diesel Reg Nr. : HN04 ### Operator : Tommy Date : 15.05.09 Time : 15:51 POWER DATA Norm power P-norm : 167.5 BHP accord to DIN 70020 Engine output P-eng : 163.0 BHP Wheel output P-wheel : 129.0 BHP Drag...

righto, seems to be a popular kind of thread :) bearing in mind its not been driven properly since August 2008, and it's now april 2009 i'd like to you to take a guess at what (god forbid) it might fail on, i can rule out the following: Wheel Bearings + Hubs - all replaced Brakes - all...

Hi guys, all i have on the LCR at the mo (engine wise) is a green cotton panel filter and forge 007. i know that custom code say youll expect 270bhp or so from a stage one map ... and about the same in torque, I just wanted to find out if anyone has had a phase 1 Custome Code map on a stock...

Well I'm just back from the dyno got my results.. These are with Bluefin and a Green Cotton panel filter fitted.. Video 195BHP at the flywheel with around 300 torques, 163BHP at the wheels.. Not bad, was hoping for anything over 190 at the flywheel so am made up with that! :D

Just wanted to say thanks for the info I got before I went for my remap, Had my Revo remap stage one done Saturday.. RR before remap 253.8 BHP 224.2 lb/ft Torque RR after remap 317.0 BHP 306.6 lb/ft Torque I have a piper cross panel filter and a forge DV with spacer and the RR...