part

i started to fill the fluids day before yestoday and put a milk bottle full of water in which is 2.27 litres, never got round to topping the rest up and forgot till tonight, any chances of damage or will it be ok? Ive just poured 1.5 litres of G12 in and squeezed the bottom hose and it was kinda...

hello guys am in a bit of a crapy situation finally got my steering column back however i cant get it to fit back in as the spline which the steering wheel connects to has been damaged so i need a new 1 and so i need the part number if possible i think flapper mite have the pics so if he...

Does anyone know the part no. for the last section of brake line which joins onto the brake cylinder? Mine was on so tight I've ruined it trying to get the nut off and had to scrap it. The car has rear drum brakes if that helps. I've looked on Vag Cat and can't for the life of me find where it's...

Morning.. I've managed to snap a clip inside my passenger side rear door whilst I was resealing the metal carrier. See the pics below for the broken plastic bit. Does anyone know if the broken bits actually do anything and will I need a replacement part, if so what is it called? The first...

I need a Coil Pack asap and the VW garage can only search by part numbers, anyone got the part number for a Cupra R 210, its not the volt down ones. Looked but cant find a straight answer.

Evening all :) Whilst under the car the other day, I looked up under the engine and saw an aluminium (I think) box approx 4" cubed, it had a large black plastic cap, which pointed down (and is obviously undone from beneath the car), this was over to the passenger side. It has ribbed sides...

hi guys, i managed to debagde the car this weekend - took approx 30 mins bit of a mark left where one of the badges was - its like a burn mark thats on the paint - thankfully no scratches made by me! i want to now get the Cupra badge thats got the spaced lettering - as on item no...

I am soon to be leaving the SEAT fold and entering the world of Japanese 4 wheel drive cars. I have a 58 plate Red Cupra K1 14,000 miles, factory black 18s, bluetooth, convenience pack 1, and seat armrest. I have been offered £15,250 is this a good price before i seal the deal? Thanks

Hi I'm new here so hi to everyone:) A month ago I bought a toledo 2.3 V5 from 2000, but after 2 weeks I noticed that there is a coolant leakage, the local mechanic from garage said that the fault is in small coupling pipe, he called Seat dealer to order this part but they can't find it in the...

hello, could you please help me out by informing me what the following part numbers are if possible please for mk2 leon, Black door mirror caps Black front grill front centre armrest thanks Cal

Ok lads, I was having the annoying 17536 (system too lean) problem for quite a while putting me into constant limp mode. Finally bought a new maf which cleared that problem. However I am still running limp, now due to 17965 (positive deviation or overboost as I read on here). This fault...

i need the part number of the rubber pipe, attached to the right side of the head (passenger side) via a black plastic thing screwed to the head... then turns 90 degrees and head to the back of the engine... i need the part number off this pipe, i cant find it on VAGCAT and need to cross...

As the title states i am getting ever closer to part exchanging my Ibiza Gti for something smaller. I only travel 6 miles to work (mainly lanes) and have decided i would like to cut my expenditure and have a car my girlfriend can actually depress the clutch on. I would love to sell her to a...

Does anyone have a part number for the o-rings used in sealing the intercooler hoses? Would be a great help if you do cos my SEAT garage are :censored:

i am looking to get a set of 18inch alloys for my 2007 leon fr ...the 5 spoke type with the centre spoke that has a line down it ..anyone now the part number:confused:

I e-mailed SEAT to ask if they could provide me with a part number for a steel rim that would fit my Altea ( also gave the VIN) The reply back was basicly NO! your car came with alloys so buy an alloy! So can anyone provide me with the part number for a steel rim? The rim details are 6.5J*16...

apologies guys but i did try the search function. i have managed to get hold of a cupra r bumper only and was thinking of changing my facelift bumper so decided to look into what parts i needed. can anyone point me to the right direction with part numbers so i can order these through TPS...

On the off chance does anyone have the part number to hand for a 2001 Mk2 1.8T one? Is it the same as a MK4 Golf GTI 1.8T, Skoda Octavia VRS and a Leon Cupra 1.8T? Im asking as a friends got a kit he is looking to sell. Thanks for your replies in advance chaps.

Hi Hope someone may be able to help with part numbers/parts illustration for bits on 1995 1.9D Toledo. I need the breather hose from front of block to valve cover and the plastic bit(technical description eh?) that that goes on the pipe between the oil pickup and oil pump. Any help...

Spoke to a reliable source there just now with dealer ETKA and got the following information We are assuming that based on the 240bhp posted in the 2010 ETKA, that the BWJ engine has been replaced by the CDLD. No access to previous version of ETKA means that it is possible that moving...